Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

new tools

Posts

new tools

#1

new tools

Paul Blackwell

When we sold our house and built new, I had to give up my pole barn shop, and go with a new basement shop. We just finished partitioning off part of the basement, new lighting, lots of outlets, and a 220v circuit for the dust collector. I sold my 8" jointer and twin canister Jet dust collector and purchased a new Grizzly 1 1/2 hp. cyclone dust collector and a 6" jointer with spiral cutter head with indexable carbide inserts. I initially had a problem getting the remote control on the dust collector to work, but tech support solved it over the phone. Both machines work fine, and I am especially impressed with the jointer. The cut is very smooth with no vibration, and the finish on the cut is like satin.

Re: new tools

#2

Re: new tools

Jason Waters

That's good news to hear. If I had to do it today, I would probably buy a sprial cutterhead jointer from Grizzly, it seems to be a reasonable upgrade. Grizzly has come a long way in the 15 years or so I have been actively woodworking.

If I ever get a bigger shop, I'll do 8", but I have been able to join anything up to 8' + with my Standard Jet 6", so unless you are doing large pieces or wide face joining, 6" works fine.

Congrats on the new tools!!!

Re: new tools

#3

Re: new tools

Dick Coers

So many Grizzly machine reports include a statement about getting in contact with support to solve a problem. I don't feel they have come a long ways, I think they peaked and have gone backwards in the past couple years. I have had many Grizzly machines over the years, and multiple Grizzly industrial machines at work a few years ago. Never called support on any of them. But I received the worst band saw imaginable earlier this year. I sent it back after a couple of weeks of work, and two parts orders. It was a horrible machine. Glad you got a couple good ones, congratulations on the new shop and shiny machines!

Re: new tools

#4

Re: Congratulations on your new tools!

Larry Clinton At Frankfort, (Central) Indiana

I have the Grizzly 8" joiner with the spiral head - I really like it . I have a 20" stationary planer with the Byrd head (son bought it for me for my retirement) and I can't see any major difference between the cut finish between the Grizzly and the Byrd heads. I do need to rotate the inserts in the Griz, used it fairly heavy doing oak trim for my son's house and have a chip in some inserts - still doing a darn good job after about 5 years - this will be my first rotation of the inserts on the joiner. I did rotate the inserts on the planer 1 time. At this rate the original inserts will outlast me! I really like the fact there is no setup when rotating the cutters. I used to spend 2 to 4 hours getting the cutters aligned on my old 6" straight knife joiner.