Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

TS:mag switch/knee switch

Posts

TS:mag switch/knee switch

#1

TS:mag switch/knee switch

Tom Dunlap

Its time to put a magnetic switch on my Rockwell contractor saw. It has a 1.5 hp 17a motor, model 62-129 running 110v.

Are Grizzly switches a good value? Before posting I did some research and read some negative rumblings. Any suggestions?

In addition, having a knee switch sure makes a lot of sense.

These two ideas seem like good solutions:

http://tinyurl.com/7d55cm2

http://tinyurl.com/7hrxcob

There are other similar knee switches in the WC archives too. Are there any better?

Thanks,

Tom

Re: TS:mag switch/knee switch

#2

Re: TS:mag switch/knee switch

Charlie Lenz

62-129 sounds like a motor model number. Anyway, I've installed paddle switches under the fences of two Contractor's table saws, one a Rockwell, the other a Delta. One switch I bought from Woodworkers supply and it came with the electrical box, the other I bought from Grizzly, they both seem to be good switches. They aren't mag switches, but they are alot easier find and reach when useing the saw, plus the old location the electrical box would fill up with dust.