Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

How to cut a circular ring

Posts

How to cut a circular ring

#1

How to cut a circular ring

JERRY DRAPER

I need to cut a ring 12" in dia. and 1/2" wide. How can I do that without using a jig saw?

Re: How to cut a circular ring

#2

Re: How to cut a circular ring

NickinMass

Router and a trammel would work (although you'll have an easier time if you can rough cut the outside of the ring). Set the radius for 6", cut the outside, then move the radius to 5.75" less the diameter of your router bit. I'd do the inside cut in a number of passes (do once around with a shallow cut, lower the bit and go around again, repeat as necessary). Of course this assumes you have a router...

Re: How to cut a circular ring

#3

Thanks Nick


Re: How to cut a circular ring

#4

Re: How to cut a circular ring

J. Waters

And usually it's nice and smooth when using a router. I like this method the best, though it can be time consuming.