Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

WB Poly Question

Posts

WB Poly Question

#1

WB Poly Question

Nat Robison

My brother and I will be spraying a piece of furniture for one of his kids.....probably some sort of white.....and might be going over top of that with WB poly.

My question is......of the brands that are easily located at HD, Lowe's, or Rockler, what's the clearest WB Poly out there? I have a gallon of Cabot's and in the can, it has a pink color to it. I tried brushing some over a painted surface and some of the pink color stayed. It probably wouldn't be an issue with unpainted wood but obviously won't work over paint.

Re: WB Poly Question

#2

Bart Goldberg

Re: WB Poly Question

Bart Goldberg

I have used General Finishes Enduro WB Poly with great success. Its is available from Rockler.

Re: WB Poly Question

#3

Ditto- Ditto *LINK*

Mark Mandell - Gone Round In New Jersey

General Enduro Clear Poly is the ticket [KCMI recommended]. It's cured film defraction index is such that it remains water white. Stay well away from the big box products, that will go to either blue or pink.

If you don't have a Rockler near, contact Jeff Jewitt at Homestead Finishing at the link.


Homestead

Re: WB Poly Question

#4

Re: Ditto- Ditto

Nat Robison

I do have a Rockler nearby and I'll look into the General product. I've used some of their oil-based stains and poly and like them very much. Interestingly, if the product you're referring to is the same one on Rockler's site (Enduro-Var WB Urethane), they describe it as leaving a slight amber tint.......but I'll trust your advice for use over paint.

They also list a WB Deft product that's supposed to be crystal clear as well.

Re: WB Poly Question

#5

Careful

Mark Mandell - Gone Round In New Jersey

Sounds like the Rockler product is a bit different. The Enduro I use adds nothing. I suggest you call Jeff and ask.

Pic is of Enduro Clear Poly over a sealer of Ultra Pale dewaxed shellac on walnut

.

Re: WB Poly Question

#6

Bart Goldberg

Re: Ditto- Ditto

Bart Goldberg

The Endurovar Water-base Polyurethane Varnish is a different product. As you point out, it is not as clear as the Enduro Clear WB Poly. Note that the EnduroVar is listed as a Retail product whereas the Enduro Clear WB Poly is listed under their professional product offerings on the General Finishes web site.

Regards

Bart

Re: WB Poly Question

#7

Re: WB Poly Question

Howard Acheson

What type of paint do you plan to use? If you are going to use an acrylic trim or enamel paint, why do you think you need to overcoat it with a clear? Waterborne acrylic trim paints are nothing more than clear acrylic finishes with lots of opaque pigments added. They are just as hard and durable as a clear acrylic. A clear acrylic over an acrylic paint adds nothing. If you want more protection, just apply another coat of the paint.

Re: WB Poly Question

#8

Amen to that

Bill Tindall

I wondered myself why one would put varnish over paint. Spray the stuff with thinned oil paint. If it gets scuffed up after a few years spray it again. I've done this approach on lots of furniture.

Re: WB Poly Question

#9

I disagree

Dick Coers

I do agree that it may not add strength, but it does give a depth to the finish that can't be duplicated with color alone.

Re: WB Poly Question

#10

Ditto

Mark Mandell - Gone Round In New Jersey

Seen some very nice pieces done with a clear coat over milk paint. Actually planning on doing a refinishing job using just that combination.

Re: WB Poly Question

#11

Where have you bought the GF poly....

Nat Robison

you mentioned above. The Rockler by me carries only the "retail" stuff. I'm striking out on where to find the pro stuff? Thanks for any help you can provide.

Re: WB Poly Question

#12

not the same issue

Bill Tindall

Milk paint is dull as dirt and I consider it a colorant more than a protective finish. To add any luster or protection it must be over coated.

However, if one is painting a kids dresser and using an alkyd oil based paint I don't see anything to be gained by a varnish overcoat. Additionally, it will complicate refinishing. If the whatever is only painted, simply repainting it will renew the finish with just a simple cleaning for preparation.

Re: WB Poly Question

#13

Re: Where have you bought the GF poly....

Mark Mandell - Gone Round In New Jersey

Nat,

Klick on the link to Homestead in my "Ditto Ditto" reply above. Call Jeff Jewitt. He's my finishing source for everything from shellacs to clearcoats to compounds.

Re: WB Poly Question

#14

Re: not the same issue

Mark Mandell - Gone Round In New Jersey

First, Bill, Nat never said anything about an alkyd for his white base coat. To get a white that actually matched the room where the piece is going, he could be using the same wall paint, and then be over-coating with the WB poly.

Second, as mentioned, overcoating will contribute to a deeper richer look than just straight paint, even gloss. This is more than just making something shiny. I see no reason not to give the "kid" a chance to appreciate a visually more sophisticated finish.

Re: WB Poly Question

#15

Re: Careful

Bill White

Modern Masters water based is what I use.

Justb for what that's worth.

Bill