Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

It worked! (I think--a drill battery tale)

Posts

It worked! (I think--a drill battery tale)

#1

Jason Roehl in Lafayette, IN

It worked!  (I think--a drill battery tale)

Jason Roehl in Lafayette, IN

I had heard the trick of zapping an ornery cordless drill battery with either a welder or a car battery, so I gave it a shot tonight--with my car running and some jumper cables with bolts as probes in the business end--on one that my charger kept rejecting. It's charging away now.

Here are some voltage stats. These are 14.4V (nominal) batteries, but I bought them used from someone online who had rebuilt them with NiMH cells (originally NiCd). They did come with an aftermarket NiMH charger since the original Porter Cable charger, while "smart" is NiCd only.

Good NiMH battery, but unusably discharged: 14.7V

Bad NiMH battery, before zapping: 1.6V

Bad NiMH battery, after zapping: 10.8V

Fully charged, I've measured over 17V on these batteries before, so we'll see what happens.

Jason