Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Floor Sander For Sanding Table Top?

Posts

Floor Sander For Sanding Table Top?

#1

Floor Sander For Sanding Table Top?

charlie beldlen

Son & wife just bought their first house - built in 1930. The kiitchen, though fairly large, has limited counter top space and limited drawer space. In the 3/4 basement, rare here in Silly Cone Valley, he found a base drawers cabinet, probably taken out to accomodate a refridgerator. This cabinet would make for a nice island - with drawers. But the old tile top had to go, to be replaced with a thick maple top.

Several local wood stores carry thick maple tops, but not in stock. They could get one in - in 4 to 6 weeks. Daughter In Law didn't want to wait for HER island top.

Eight years ago, a buddy and I bought surplus old maple lab bench tops - 34" x 72" x 1 3/4" thick. Mine went into my woodworker's bench. Fortunately, his was still in one of the metal sheds on his property. When he heard what we had in mind for it, he gladly offered it to Chas for free and we picked it up this morning.

The top has all sorts of hole in it, where lad equiptment had been screwed to it. The bottom was in better shape - but desperately needed sanding. (Sure, it COULD be scraped - or hand planed - but he hasn't used a hand plane and scarping would take FOREVER). Dug out my Delta drum sander but something this big, this thick and this heavy is difficult to control, even with two people.

The Kid asked - "Would a floor sander do the job?" Hmmm. . . large flat area of wood, floors are large flat areas of wood - floor sander!

Popped the bench top on some sheet foam insulation to get it off the ground and he went at it with the floor sander, starting with - 30 grit. Worked up through 80 grit and then 100 grit.

Outside the Box thinking - that worked! A little ROS sanding with 120 then 150 and he'll be ready to apply mineral oil to the top and bottom - and start using the new kitchen island - with maple top.

Next time you've got a large flat area that needs sanding . . .

Re: Floor Sander For Sanding Table Top?

#2

Re: Floor Sander For Sanding Table Top?

Bruce, a MN Galoot

Yes, a floor sander would work, BUT I wouldn't do it that way. I think it wouldn't give you the consistent, even, predictable results you want.

It would be a great deal simpler to haul it off to a cabinet shop with a wide-belt sander. You might have to take off the finish before they will tackle it, but the results would be much better.

Re: Floor Sander For Sanding Table Top?

#3

that's one I would not have thought of

Bill Tindall

What kind of floor sander do you speak of? I can't imagine how a typical floor sanding machine could be used on something that small.

Re: Floor Sander For Sanding Table Top?

#4

Re: that's one I would not have thought of

charlie belden

Split rubber drum about 10" wide. Fold over one end of a sheet of sandpaper made for the unit, tuck it in the split in the drum, wrap the rest around the drum, fold over its end and tuck it in the split in the drum. Turn an eccentric bolt on both sides of the drum to close the split on the sand paper.

Wheels in the back, bottom of the sides are curved, spring loaded roller in front. Lift the handle and the front spring loaded contacts the surface being sanded. Lift handle a bit more and the sanding drum starts sanding and propelling the unit forward - at a rate you can easily control.

Tried to get the local lumber store that USED to do drum sanding for a fee. Now it's more like a Home Center and only drum sands stuff you bought from them. Oh - and a 34 x 72x 1 3/4 hard maple bench top weighs in at somewhere between 125 and 150 pounds.