Sleigh Bed
Mark Meier (Ann Arbor, MI)
Here are some photos of a sleigh bed I just finished making - Cherry and Tiger Maple.
To see the details on how I made it please click here.
Mark
Knowledge You Can Build On — Est. 1998
Sleigh Bed
Mark Meier (Ann Arbor, MI)
Here are some photos of a sleigh bed I just finished making - Cherry and Tiger Maple.
To see the details on how I made it please click here.
Mark
Re: Sleigh Bed
Bart Goldberg
Mark,
An impressive set of tools/machines you have there. How long does it take to program a CNC machine to cut your parts?
Bart
question
Bill Tindall
Well first a compliment...what a graceful design. I presume a complimentary chest of drawers is in the works?
How did you cut and shape the long arcs?
Re: question
Mark Meier (Ann Arbor, MI)
Hi Bill,
Thanks for the compliment. I shaped the curves using a CNC router. Please see the link below - it has lots of detail on the fabrication process:
Wolff Sleigh Bed Fabrication Details
Mark
OMG! Don't try this at home.
Bill Tindall
You should post this on the hand tool forum.
Personally, I would have had a double granny knot in my stomach when I pressed the "start" button and wood stated to go away. But I guess there is some means of ensuring all is well before wood starts to go away?
PS
Bill Tindall
tell the prof that we have thoroughly evaluated the project and declared it gets an A+. Did any of the other students do a furniture project. If so, post?
Re: OMG! Don't try this at home.
Mark Meier (Ann Arbor, MI)
>>You should post this on the hand tool forum.<<
LOL. Well I did use a few chisels, spokeshaves, planes, and scrapers! But I also did a lot of power-sanding. My friends on the hand tool side would not be pleased.
Thankfully it is possible to accurately simulate how the CNC will cut before you "press start". It's still very nerve-wracking. Not only can you damage the wood you can damage the machine if you aren't careful.
Mark
Re: Sleigh Bed
Mark Meier (Ann Arbor, MI)
Bart,
I modeled the bed form in a program called Rhino. Then that 3D geometry gets imported into a program called Mastercam which is where I set up the tool paths. I'd say it was somewhere between 4 and 8 hours getting things perfect in Mastercam. I also had to set up all the tool paths to cut the fixtures before I could cut the hardwood. So maybe something like 12 hours total.
Mark