hole saws or bits
wooden leg
I have several hole saws, they all take the same arbor. How do you store them? I sharpen them and then put them in a box. As always, thanks. Dave
Knowledge You Can Build On — Est. 1998
hole saws or bits
wooden leg
I have several hole saws, they all take the same arbor. How do you store them? I sharpen them and then put them in a box. As always, thanks. Dave
Re: hole saws or bits
Tom Dunlap
My specialized drill kit goes in the bottom drawer of my stacker toolbox.
when I made the holesaw storage I set out all of them onto my workbench in descending size. About 1/8" between them. That showed me how big a base piece I needed. Then I cut a piece of ash that is thicker than the smaller diameter tang on the hole saws. Next I put the holesaws onto the ash and lined them up neatly. When I had them squared away I used a transfer punch to locate the holes. A trip to the drillpress and I had my base ready. There was extra space on the ash slab so mounted a small plastic box to hold the extra pilot bits and arbors.
Tom
Re: hole saws or bits
steve mackay
Mine are all hanging on the peg board so as not to bang around. (no outlines please)
Re: hole saws or bits
John in NM
I often nest mine and keep them in a tool box. I probably don't take as good care of them as some of you guys, because to me they are disposable bits and mostly used in construction (which will, I hope, be a temporary activity for me
)
Most of my big holes for woodworking are done with Forstners or big augers.
Cardboard box for holesaws, index box for bits
Kneale Brownson
I roll large bits and auger bits in oiled rags.