Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

New Workbench

Posts

New Workbench

#1

New Workbench 

Thomas Skaggs, Foothills of Mount Level

So, after months of work, the new workshop is up and running! I had just one task to complete before I could call the shop "complete". I was lacking a workbench. I have a wonderful old industrial arts bench but I needed a bench that I could work from all sides.

There are many traditional forms of benches out there but I decided to design one that functioned specifically for how I work. So here it is:


The top is an assembly. The main work surface is a section of salvaged bowling alley. I constructed a frame around it of cherry.


One end of the bench has a built-in storage box with a cherry lid that is flush with the top. The lid, when closed, adds additional work surface.


Inside the storage I keep my bench chisels and assorted common "go-to" items.


The other end has holes for bench dogs. The base is a very sturdy steel product called "Adjusta-Bench" by Noden. It is a heavy steel base that has mechanisms on both ends that allow me to raise and lower the height of the bench with little effort. The bench is heavy as all gitout but adjusting the height is surprisingly easy.

Overall dimensions....32" wide and 7' long. Danish oil finish.

Tom

Re: New Workbench

#2

Re: New and Beautiful Workbench

George Colonel's Workshop-Havertown PA

Good Morning Tommy,

That tool compartment within the bench top is a stroke of genius. I love it, and your ability to raise and lower such a substantial table. The design, as youy say, was right down your alley. 8)

George

Re: New Workbench

#3

Re: New and Beautiful Workbench

Thomas Skaggs, Foothills of Mount Level

Colonel...that for "sparing" some nice comments. I'm striking a smile as we speak.

T.

Re: New Workbench

#4

Re: New Workbench

Andy Lincoln,in Dearborn MI

I am bowled over by this one.I like the idea of the flip open storage but I would probably pile my project on the wrong end and not be able to access it!!

Nice,Tommy,nice!!

Andy

Re: New Workbench

#5

Very nice!

John in NM

And I know right where you're always going to set stuff down when you walk into the shop :D Ya can't beat Mr. Murphy :D

Still think it's a neat idea though... the only bowling pun I can think of would probably get deleted though :D

Re: New Workbench

#6

Murphy's Law

Thomas Skaggs, Foothills of Mount Level

Thank you. And yes, I live my life according to Murphy's law! But that's why I built the bench so long and kept the dogs at the other end. That should keep the project off the lid unless the lid is needed for extra support...on those occassions, I had better think ahead!

T.

Re: New Workbench

#7

Re: New Workbench

Howard Acheson

Very nice looking and the covered storage is unique.

How did you attached the end cap to allow for the expansion/contraction of the benchtop?

Re: New Workbench

#8

Re: New Workbench

Thomas Skaggs, Foothills of Mount Level

Thanks. There isn't much movement in the top. But what little there may be should not be a problem.

T.

Re: New Workbench

#9

Re: New Workbench

Jason Waters

She's a beauty!

I'm going to have to check out that adjust a lift deal. Seems like a great idea.

Jason

Re: New Workbench

#10

Re: New Workbench

Dave Peebles Lyons, Ohio

Hi Tom,

An absolute beauty!! What a wonderful addition to your work space.

To me, a great work bench is the key to a productive shop. Your creation fits the bill perfectly.

Best wishes,

Dave

Re: New Workbench

#11

Ellis Walentine

Flip-open storage bin

Ellis Walentine

I thought I had seen it all, then you come up with this. Whew. Nice touch, Tommy. Geoff Noden will be pleased to see his base under a top like that.

Thanks for the photos. That bench is a stunner.

Ellis

Re: New Workbench

#12

Kneale Brownson

Is there a vise to go with the dogs? 


Re: New Workbench

#13

Re: Is there a vise to go with the dogs?

Thomas Skaggs, Foothills of Mount Level

Howdy Kneale,

You are the only one to ask! By design, no there is not. I did not want to have a vise in the way. On this bench I will use K-body clamps to secure work against the dogs. Works quite nicely in fact.

T.