Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

How to hang

Posts

How to hang

#1

How to hang

Gary Smyth

I got this eagle that was on a post civil war building. It was salvage in the melt pile. The worker said that there were five or six more, but trust me in over an hour looking I couldn't find them. Anyway, It is about 7 1/2" x 5 ", solid bronze, weight, 7 pounds. I want to mount it on a wall with a series of other eagles. I want it as is as much as possible. I would prefer no backing placque or the like. No drilling or additional fasteners on the front. As this picture is taken, the work is top heavy. I can fill the bottom 1/3 with a semicircular wood block. I can hold that with the existing screw and perhaps a dab of construction adhesive. What can I use on the top? What about plaster smoothed flush with the back and an imbedded picture/mirror hook or ring? With the rough interior casting do you think that the plaster will be able to hold the sides well enough? Whatever is done has to be reversible. No changes to the face side. Suggestions please.

Re: How to hang

#2

French Cleat

Lee Schierer McKean, PA

It appears that you could use a French cleat and just hang if from the top of the lip on the back and not fill it with anything. As long as gravity doesn't fail it should stay upright and on the wall. I wouldn't recommend drilling any holes as it might affect the antique value (if there is any)

Lee

Re: How to hang

#3

Re: How to hang

Thomas Skaggs, Foothills of Mount Level

In my opinion, most things (not all) with bases should sit on a shelf or ledge of some kind. Maybe just me but things with bases just suspended on a wall look a bit odd.

Tom

Re: How to hang

#4

Re: How to hang

NickinMass

What about a french cleat type approach? It looks like the opening in the back has enough of a "lip" to engage the bottom half of a french cleat. Granted, the opening does look a bit uneven, so you might need to a lot of fitting to make it hang straight, but you could do all the fitting on the cleat side so it won't harm your casting.

Re: How to hang

#5

Tom, normally I would agree,

Gary Smyth

but in this instance it will (hopefully) be mounted with many other "finds" using an eagle theme on the shop wall. Some wood, some metal, some recognizable but most unique (to me at least).

Re: How to hang

#6

Gary......

Thomas Skaggs, Foothills of Mount Level

....I understand. I did note exceptions and in your case, a grouping would make a difference and keep it in context. Too bad it's not iron or else you could do it with magnets! ;-)

Re: How to hang

#7

French Cleat

Gary Smyth

As I look at the piece the hollow in the back cants on three sides toward the rear. It is narrower toward the face side than at the rear. That means that it is just the opposite of the direction that would lock it into the piece. I'm not sure how I would work it to set up the cleat as the cleat face facing toward the face of the eagle (eagle face side) would have to be fitted angling downward and once fitted rise angling outward toward toward the rear and then form the cleat. Maybe I'm not seeing it. Times like this I wish I could draw. But what about a cleat inserted in the hollow, held with adhesive with the cleat formed off of that. It would just be a block (not necessarily fitted closely) held well enough to keep the top heavy part from falling away. The wood at the bottom could be the true anchor.

Re: How to hang

#8

Kneale Brownson

Re: French Cleat

Kneale Brownson

That pix of the back looks like that was intended to use something like a French cleat. I agree with Lee.

Re: How to hang

#9

I agree

Bill Tindall

I thought shelf as soon as I saw it. The object is formal so the shelf should be, lots of molding under it and formal profile on the edge.

Re: How to hang

#10

Leo Cuellar

Re: How to hang

Leo Cuellar

Not sure that plaster would hang on, but if you clean the back real good you might be able to use epoxy to mount your top cleat in. Another possibility might be to drill & tap two shallow holes on the flat behind the neck. There appears to be more than enough "meat" for that then you could use a picture wire or make a hook to bolt to it.

Re: How to hang

#11

Re: French Cleat

John McGaw

I think that you will find that a true 'French' cleat is not need or even desirable. Instead think about a piece of hardwood with a rabbet on the top edge that engages with the casting. Assuming that the lip of the casting is somewhat uniform it should be a simple matter to arrive at the proper rabbet depth that will allow the wood to lay flat against the wall and engage the metal lip. If you want to get fancy then you could shape the top of the wood to fit into the uneven recess in the casting and then use a router to cut the rabbet; this would allow you to mount the wood vertically and be assured that the casting will remain aligned.

Re: How to hang

#12

I still would put it on a "shelf"

Bill Tindall

It needs a base of some sort. I would mount it to a shelf that would serve as the wooden base and then screw the shelf to the wall