Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Making a Rhombic Triacontahedron

Posts

Making a Rhombic Triacontahedron

#1

Mark Meier (Ann Arbor, MI)

Making a Rhombic Triacontahedron

Mark Meier (Ann Arbor, MI)

A rhombic triacontahedron is a 30 sided polyhedron. Each face is identical. It's made by taking a golden rectangle and connecting the midpoints of each edge which results in a diamond shape:

Photobucket

Here's the one I made from walnut and ash. It's about the size of a volleyball.

Photobucket

It’s actually held together with magnets – 120 of them – one in each edge.

Photobucket

It was cut on a 5-axis CNC at the University of Michigan. Here’s the machine and the fixture which holds the work as it’s cut.

Photobucket

Vacuum pressure comes through the table and fixture to hold it in place. Two tiny pins prevent it from twisting during the cut.

Photobucket

Photobucket

I still need to clean it up and put the finish on.

Mark

Re: Making a Rhombic Triacontahedron

#3

Geodesic

Tom Dunlap

Bucky Fuller would have liked to see that!

Re: Making a Rhombic Triacontahedron

#4

Alan Young

Very Cool!-Was that done on North Campus?


Re: Making a Rhombic Triacontahedron

#6

Re: Thats a real Bomb

Larry Clinton At Frankfort, (Central) Indiana

casing, I believe that is the structure used in both of the Atomic bombs used in Japan in WW2. Nice work.

Re: Making a Rhombic Triacontahedron

#7

Mark, that is very  cool.

Keith Newton

That looks close to 60º and 120º, but i would like to hear what it is exactly, plus thee side bevel. it seems like you could easily jig up to just saw the parts easily enough, unless you were just using it to teach routing techniques.

Re: Making a Rhombic Triacontahedron

#8

Mark Meier (Ann Arbor, MI)

Re: Mark, that is very  cool.

Mark Meier (Ann Arbor, MI)

Keith,

I'm a student at Michigan. So I was doing it to learn and to have some fun. Certainly this could be done on a table saw and drill press. However, achieving the same level of precision is not as easy. I do think you'd get a better cut from a saw blade than a router bit.

The angles are 31.72... and 116.57... The angles between the planes are 114.

Rhombic triacontahedron

The CNC also drilled the holes for the 1/4" diameter by 1/10" deep magnets.

Mark

Re: Making a Rhombic Triacontahedron

#9

Thanks Mark, but,,,,,,,

Keith Newton

I guess you have to tell the machine something other than plane geometry, but the numbers you gave, don't seem to add up. However, the link which you provided helped me understand it a little better.

It appears there, that the acute angle is 63.43º, which would make the obtuse 116.57º, with the bevel angle 24º, assuming that the square edge is 0º.

That looks like a fun project for a class, so keep up the good work.

Re: Making a Rhombic Triacontahedron

#10

Re: Making a Rhombic Triacontahedron

Yonak

Is a rhombic triacontahedron unique in that the sides are constructed starting with a golden rectangle ?

Re: Making a Rhombic Triacontahedron

#11

Moses Yoder

Re: Magnet polarity

Moses Yoder

It looks like each side has 4 magnets, which means the magnets in connecting sides would need opposite polarity. So it seems like each side could probably only fit in one place. Are they marked somehow, or what?

Re: Making a Rhombic Triacontahedron

#12

Re: Making a Rhombic Triacontahedron

Dick Coers

We have a local guy near Peoria, that does them as art objects.

http://www.oddballgallery.com/

Re: Making a Rhombic Triacontahedron

#13

Mark Meier (Ann Arbor, MI)

Re: Magnet polarity

Mark Meier (Ann Arbor, MI)

Hi Moses,

Yup, they have to be alternate polarity... So I sketched it on paper before I started gluing in magnets... As long as I went around the edges in a consistent way and altered the polarity between adjacent edges it works out fine. The parts can nearly go anywhere - and you'll feel immediately if it "doesn't want to go". Then you just rotate the piece and it'll fit. So they can basically go anywhere it "feels right". Kinda cool.

These are the magnets I used.

Mark

Re: Making a Rhombic Triacontahedron

#14

Mark Meier (Ann Arbor, MI)

Re: Making a Rhombic Triacontahedron

Mark Meier (Ann Arbor, MI)

Wow, now THOSE are nice! Thanks for the link.

Mark

Re: Making a Rhombic Triacontahedron

#15

Mark Meier (Ann Arbor, MI)

Re: Making a Rhombic Triacontahedron

Mark Meier (Ann Arbor, MI)

Yeah that's a good question about the faces... I'm not sure if it's the only one or not. I do know that golden sections appear in lots of polyhedra "internally". Like in the dodecahedron and the icosahedron.

Here's some interesting info.

Mark

Re: Making a Rhombic Triacontahedron

#16

Mark Meier (Ann Arbor, MI)

Re: Thanks Mark, but,,,,,,,

Mark Meier (Ann Arbor, MI)

Hi Keith,

The one angle I gave is actually 1/2 of your angle - I measured outside to horizontal rather than inside. The other angle I gave is the same. The bevel angles differ by 90 degrees. Anyway, glad you got what you needed!

Take care,

Mark