Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Do you Need Cheap Drill bits?

Posts

Do you Need Cheap Drill bits?

#1

Do you Need Cheap Drill bits?

Barry Irby

Just went to Lowe's and they have sets of Skill drill bits on the end caps for $12.97. Its a 100 bits ranging from 1/16" up to 3/8" by 64's. There are 18 of some of the smallest ones and then two or three each of the larger ones. I am sure they a pretty crummy bits and they are made in China, but for the price they could be utilitarian and treated as disposables. I just bought about four individual bits to replace the snaggled teeth in my indexes and paid more than that for them.

Does Bosch Own Skill? On the packaging they are labeled as made by The Robert Bosch tool company.

Lowe's number 176028 if anyone cares. (I have no relationship with Lowe's and I have not even tried these bits, I'm just say'in.)

Re: Do you Need Cheap Drill bits?

#2

Re: Do you Need Cheap Drill bits?

George Colonel's Workshop-Havertown PA

Good Morning Barry,

I non-productive, unprofessional individuallike myself in a home shop setting need not buy the finest and most expensive drill bits available. I've gottern along quite nicely using less expensive its. I use a drill doctor when they get dull. Should they break, I throw them away and replace individuals with HD/HF offerings. I do use them mostly in a drill press, and don't expose them to side loads.

Of course, there are others who disagree and buy the finest. My #3 son uses Mad Dog bits quite a "bit", and he is professional.

George

Re: Do you Need Cheap Drill bits?

#3

Re: Do you Need Cheap Drill bits?

Jim Hager

Yes Bosch, Skill and Dremel are all a part of the same group and have been for quite some time. The factory that made the Dremel tool and several skill products was just down the road from me until they moved it to Mexico about 5 years ago. The Re-furb service center is still there tho in the building that used to be the factory. All of the Bosch, Skill and Dremel products that are returned go there for factory reconditioning and then sent out to outlets all over the place.

Re: Do you Need Cheap Drill bits?

#4

Re: Do you Need Cheap Drill bits?

wjb

Just a disclaimer:

I'm not implying that the subject matter bits are the ones discussed in the link, nor am I looking to start a bash China thread.

http://www.bridgecitytools.com/blog/2010/10/25/5-for-a-18-twist-drill-only-in-america/

Re: Do you Need Cheap Drill bits?

#5

Re: Do you Need Cheap Drill bits?

Howard Acheson

In my opinion, it's silly to spend a lot of money of twist drills that are used for wood. Wood is easy to drill and and bits should last almost forever. If you are drilling metal then better bits make sense.

Re: Do you Need Cheap Drill bits?

#6

Re: Do you Need Cheap Drill bits?

Barry Irby

I have not reread my post but I recall stating over and over that Tye were crummy bits made in China and that their only virtue was they were Cheap, as mentioned in the title. There have been numerous posts here about sharpening small bits and several people have commented on the Drill Doctor and such systems for sharpening. Others said to treat them as disposables and buy new ones. At the rate of 100 bits for $13 it would take me a LONG time to justify a Drill Doctor. Actually, MY problem is my son is convinced they are disposable and if he uses one it is unlikely to find its way back to the index. He seems baffled by the concept that their are "sets" of things that should be kept together and organized. It will be a good day when he gets his life together and moves away, far away, from here. Does anyone know where he left the Allen wrench for the Sawzall or any of my chuck keys? Even a pot metal drill bit will drill a few holes in wood if you don't lose it.

And, The Chinese can't make anything you ask them to. If they don't have the technology, they will happily get it from us. If the quality is crappy I would be inclined to hold Skill and Bosch responsible for not writing good specifications and monitoring what they are having made. After all, they put their name on it.

Re: Do you Need Cheap Drill bits?

#7

Re: At that price ....

Charlie Lenz

I bought a set today. My experience with Skil tools has been good over the years, and yes they are owned by Robert Bosch now, which I believe their jigsaws and jigsaw blades are rated pretty highly, I have their barrel grip style Jigsaw and am very happy with it so far. Anyway, the drill bit assortment will be nice to have as backup.

Re: Do you Need Cheap Drill bits?

#8

Re: Do you Need Cheap Drill bits?

Jason Waters

Barry,

you have a sawzall that uses an allen wrench? I think your son is hinting you need a tool-less chuck one......Actually, you can find them used at decent prices. I've got a Tiger saw around here somewhere that uses an allen...

As for your other comments, spot on

Re: Do you Need Cheap Drill bits?

#9

Re: Do you Need Cheap Drill bits?

Jason Waters

You can get by using cheap bits for wood a lot, particularly in construction. These bits are great if you live in a block house with furring strips, and are pre drilling holes. OOps, I hit a block, went too far-TRASH

1/8 and smaller (ok sometimes 1/8 I do) I don't use the drill doctor. I can't quite get it right. Though I can with the grinder (believe it or not), as that's what I learned with. Though it is hit or miss sometimes. I do some metal working, and for that, I go to an industrial supplier, and pay like $0.89 for US, or Brazil made 1/8 bits that are superior to that stuff in HD or Lowes. It matters in metal!!!! Particularly hard metal!!!

But kits like this are great for those projects people mentioned.