Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Help about Pine timber

Posts

Help about Pine timber

#1

Help about Pine timber

Juan Carlos

Hi friends, i want to build Kitchen cabinet using pine timber, is it good for this? i speak spanish in my country we know a timber called "pino canadiense" in english "canadian pine" i wonder if you knows the real name for this timber? this timber is used in packaging machinery, thank you and bear with me.

Re: Help about Pine timber

#2

pine can be used for cabinets

Bill Tindall

If you like how this wood would look then use it. When I was a child we had pine cabinets in the house. The first house my wife and I rented had pine cabinets.

"Canadian pine" could be either pine, hemlock or spruce. They all look similar.

Re: Help about Pine timber

#3

Re: Help about Pine timber

Keith Newton

Don't know where you are, but here lots of the pine of the construction grade will not be as dry as cabinet grade, so it will shrink more than can be tolerated for tight joinery.

But then, Im told that air dried is normal in moderate climates where heat and AC aren't necessary. You might want to check with a local shop, and or the supplier.

Re: Help about Pine timber

#4

Re: Help about Pine timber

Larry Clinton At Frankfort, (Central) Indiana

There is nothing wrong with using pine, as was stated before - much of what is identified as pine may be other species. These may also be used if you like the look. One thing to look out for is that most spruce/pine/fir is considered as structural lumber and is only dried to about 16%, while most wood used for furniture and cabinets is dried to around 6%. You may want to purchase the "pine" and store it for a period of time in a dry warm location (a month or two) with stickers between the boards to allow air flow and weight on top of the pile to hold it straight. Otherwise you may find it will warp and or crack after you build your cabinets.

Re: Help about Pine timber

#5

Re: Help about Pine timber

Bill Howatt

As mentioned pine may refer to pine, spruce, hemlock. Pine itself may also be white pine or red pine.

A disadvantage with these woods is they are soft compared to hardwoods so they can get damaged if they are in an environment where they get abuse. Even with that problem, pine is used for tables and other furniture and even floors; some people like the distressed look that may develop on tabletops and floors.

You also have to be careful about the grade of pine you are buying since the cheaper grades can have lots of knots. However, some people like the knots for the appearance but they make the wood difficult to work with and if the wood isn't dry the knots may severely crack and even fall out when the wood dries.

Bill

Re: Help about Pine timber

#6

Re: Ayuda sobre la madera del pino

Lee Schierer McKean, PA

Los gabinetes de cocina en la casa de mi madre son de pino. Nos referimos a él como el pino nudoso, pero sobre todo es pino blanco. La madera se trabaja fácilmente y se puede acabar con la mayoría de los acabados de madera, excepto el aceite. La mayoría de la gente usa laca o barniz. Se puede pintar de pino, pero hay que tener un cuidado especial para sellar los nudos con goma laca, porque el terreno de juego en los nudos se sangran a través de la mayoría de las pinturas después de un tiempo.

The cabinets in my mother's house are made from pine. We refer to it as knotty pine, but specifically it is white pine. The wood works easily and can be finished with most wood finishes except oil. Most people use shellac or varnish. You can paint pine, but you must take extra care to seal the knots because the pitch in the knots will bleed through most paints after a while.

Leon

Re: Help about Pine timber

#7

Re: Help about Pine timber

Rod Rentz

See Shop Shots #911.

Of course the timber was well dried - - - heart pine 200+ years old!