Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Porter cable 4200 dovetail jig

Posts

Porter cable 4200 dovetail jig

#1

Porter cable 4200 dovetail jig

Lester Gillett

I received a PC 4200 dovetail jig for Christmas and just now going to use it. It came with two templates

and the one for through dovetails has on the tail fingers there is a half blind ingraved on it and a depth

setting. No where in the manual is there any instruction on how or what it is used for. Does any one have

this template and know where there is any instruction for it or how to use it ?

Lester

Re: Porter cable 4200 dovetail jig

#2

Re: Porter cable 4200 dovetail jig

Jesse Cloud

I have that jig and am reasonably happy with it. There is a web address on the box it came in. Check that out, there are some excellent videos on how to set it up and even some ideas for advanced techniques with it. If you can't find your box, let me know and I will try to find the web address.

Tip: getting the depth setting part precise is very, very important. Spend the time to get it right and save later frustration. Try several test cuts. Make a few "utility" boxes or drawers for the shop to get used to the jig before you make fine furniture for the wife.

Re: Porter cable 4200 dovetail jig

#3

Is this what you are looking for *LINK*

Dustmaker Mike

Here is the information from Porter Cable on that jig.


4200

Re: Porter cable 4200 dovetail jig

#4

U tube video's on jig  LINK

del schisler

http://blog.woodcraft.com/?tag=dovetail-jigs

Re: Porter cable 4200 dovetail jig

#5

Re: Porter cable 4200 dovetail jig

Lester Gillett

Thanks guys for all the information. I found in the outher manual that if you are making halfblind

dovetails thicker then 7/8 then you use the through dovetail template and use the line marked on

it for halfblind dovetails. I new that there had to be used for something specal but the manual that

came with the jig didnot show it. To make the tails in thicker wood you need longer fingers to make

the tails lok right and thats what the through template has. I am going to work on seting it up this

week end after i mill a hackberry log i picked up today. How id the best way to film useing the jig to

make a video for youtube and our club ?

Lester