Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Unusual Wood

Posts

Unusual Wood

#1

Unusual Wood

Hank Knight

My law partner planted an Eastern Redbud tree (cercis canadensis) to commemorate the birth of each of his grandchldren. The oldest of these trees blew down in a winter storm in 2009. My partner asked if I could make something for his grandson from the remains. I agreed to give it a shot and took a couple of pieces of the trunk home to my shop, sawed them up into boards and let them dry for over a year. The wood has a lot of shake and it split badly during the drying process, but I was able to salvage enough clear stock to make this box:


I think the wood is stunning. The finish is tung oil with walnut accents.

Hank

Re: Unusual Wood

#2

Wow!

doug f, san clemente, ca

Incredible looking grain and a beautiful project.

I'm curious how the piece on the top is connected to the bottom/body of the box. Was that question about as clear as mud?

It will make a wonderful gift.

Doug

Re: Unusual Wood

#3

Re: Wow!

Hank Knight

Doug,

Thanks for the compliment on my box. The top is hinged:


The bottom is lined with leather.

Here's a photo of the tree in all of it's Spring glory for those of you who may not be familiar with it:


Hank

Re: Unusual Wood

#4

Re: Unusual Wood

Ron Jones

Love the grain on the box--outstanding work. Your partner should be well pleased. The tree was very attractive; it's nice to have something useful and of sentimental value from it.

Re: Unusual Wood

#5

Re: Wow!

doug f, san clemente, ca

Yeah, apparently I was as clear as mud. My question was on the slab, looks like about 1/2", that was inset into the frame that forms the top. Is is glued or fastened somehow into the frame.

I'm just curious how other folks handle this construction detail.

Thanks.

Doug

Re: Unusual Wood

#6

Re: Wow!

Hank Knight

My bad, Doug. I understand your question now. The top panel is joined to the sides with an interlocking tongue and groove construction. I set my table saw fence to cut a shallow kerf leaving narrow "tongue" that is exactly the thickness of the saw kerf. With the top panel flat against the fence, I cut a kerf all the way around the edge of the top panel. Then, using the same fence setting, I cut a groove on the inside top of each of the side panels. The tongue on the top panel fits into the groove in the side panels (and vice versa), and the top panel is thus captured on all four sides. This construction allows the top panel to float in the groove and permits expansion and contraction of the panel. I can't find a clear illustration to post so I hope my thousand words make sense.

Re: Unusual Wood

#7

Clever...

doug f, san clemente, ca

I like that idea. Thanks for the follow-up.

Doug

Re: Unusual Wood

#8

Re: Unusual Wood

DizD

If I remember correctly, this is one of the woods which will give a bigger "wow" factor by putting it in a darkened room and illuminating it with black (uv) light. Let me know if it works.

Re: Unusual Wood

#9

Re: Unusual Wood

Bill White

Looks like ya nailed that one Hank. Well done.

Bill

Re: Unusual Wood

#10

Re: Unusual Wood

Hank Knight

Thanks, Diz. I'll pass the tip on to the new owner of the box.

Re: Unusual Wood

#11

Re: Unusual Wood

Hank Knight

Thanks, Bill. I delivered the box to my law parthner in Winston-Salem yesterday. He was delighted with it.

Hank