Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Door still seal

Posts

Door still seal

#1

Door still seal

wooden leg

Every year I have to replace the bottom seal on my utility room outside door. Is there something I can do so I don't have to replace it every year. It does get the most use. I have to take the door off the hinges to replace seal. Dave

Re: Door still seal

#2

Re: Door still seal *LINK*

Bill Houghton, Sebastopol, CA

If you've got a tallish threshold, you can get seals that apply to the inside face of the door and seal against the threshold. One example below, although you can get them made from wood and aluminum, too, either of which might be more durable.


http://www.nb-felicity.com/en/MainShow.asp?ProductID=540

Re: Door still seal

#3

Re: Door still seal

wooden leg

Thanks. Dave

Re: Door still seal

#5

Re: Door still seal

Alan in Little Washington (NC)

I don't have a link, but there used to be a threshhold seal that was activated when the door was opened or closed. There was no scraping so much less wear, it moved up and down when the door closed or opened.

Re: Door still seal

#6

Automatic door seal *LINK*

Dick Coers

is what that's called.


auto door seal

Re: Door still seal

#7

Re: Door still seal

NickinMass

Look for an "automatic door sweep". It is a spring-loaded sweep that folds down to meet the floor as the door is closed (so little/no wear). They installed several of them when we had the house air sealed a couple of years ago. I recently put one on the door out to our eaves storage - easy to install and very effective. I found one at my local hardware store, but I'm pretty sure you can order one from Amazon if you can't find one locally.

Re: Door still seal

#8

Re: Door still seal

wooden leg

I must of had too much water to drink yesterday. I was thinking sill not still, Had to build a box for my son to hold his booze. Thanks for all the answers. Dave

Re: Door still seal

#9

Re: Automatic door seal

Alan in Little Washington (NC)

Thanks, Dick, I need one for my shop door- which is at the top of the stairs that lead down to the kitchen.

Re: Door still seal

#10

Re: Door still seal

Jason Waters

There used to be a metal threshold, a piece that went on the door, and it hooked into a groove in the threshold. A real nightmare to install, but they worked great. I don't think they have been made in a long time, but I haven't looked.

That automatic Pemko seal looked pretty good.

I agree all the door sweeps I find don't seem to last.