Laguna Tools' Resaw King Bandsaw Blade
charlie belden
What DO you call the band with teeth that a bandsaw uses to cut wood?
Torbin, the president and owner of Laguna Tools is a bandsaw phreak. He enjoys slicing a see through, paper thin piece off a 12" wide board. He did, and perhaps still does, a lot of resawing to make bent laminate pieces. Not satisfied with bandsaw blades on the market, he designed his own, certain that it'd do what he needed a bandsaw to do. As president of the company, he was able to have his idea actually made. Worked as he expected and he added the Resaw King to his product line - originally at about $3 per inch of blade. Over time the price came down - a little - but still prohibitively expensive, at least for me. My bandsaw uses a 130" band
Laguna Tools had a Special on their original Resaw King carbide tipped bandsaw blades. The normal price was about $2.50 and inch so $75 for a 3/4" x 130" for my bandsaw was too good a deal to pass up. That was a year ago, and until today, it was still in the box I got it in.
Now I've done some thin resawing with a Wood Slicer and thought the sawn surfaces were pretty good. But I sometimes had to plane a sawn face flat before the next cut. Figured that was to be expected at times.
The results I'm getting from the Resaw King is impressive - can't tell the original planed surface on the board from the sawn surface - and the carbide teeth allow a faster feed rate than the Wood Slicer.
Checking LT's site, the Resaw King is now normally $1.73 per inch, but they've got a 25% off deal going. Not as good as about 60 cents per inch, but better than $2.50 an inch. If you've got some really nice figured wood - and want to stretch it by slicing it up into bookmatched thick (1/8") veneer - say for a piece of furniture, or a guitar top . . .



