Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Grain filling

Posts

Grain filling

#1

Grain filling

mdclor

I have not previous filled the grain on my projects. I think I would like to try it on the qswo sofa table I am working on. I intend to stain it with a TransTint dye and use Target EM6000 (water borne) for the top coats.

What is the preferred method and product to use for this? I seem to recall that the Target fillers, EM1000 and HSF5100, are problematic, but I don't know what the issues were.

TIA,

Merle

Re: Grain filling

#2

Re: Grain filling

Mark Mandell - Gone Round In Jersey

Morning Merle,

For the times that I've wanted a filled-pore finish (only on table tops ), I've used Crystal-laq waterborne filler. Since it's waterborne, I lightly seal with a spit-coat of shellac, then apply the filler with a plastic squeegee allow to dry, then hand sand (no powered stuff here) moving with the grain using a wood block and 220. Usually takes 2 applications to catch all the pits. You can also tint the stuff with TransTints, but I've never done so. Apply finish and the stuff "disappears".

Re: Grain filling

#3

Re: Grain filling

Larry Clinton At Frankfort, (Central) Indiana

Several years ago, I had an Oak table in a custom van that had deteriorated to the point that I had to sand off all the old finish and re-coat. I posed the question to Michael Dresdner (one of the top finishing experts in the world) as to what pore filler would be the best. He recommended two, I can't remember the second one, but the one I purchased was "Enduro Transparent Woodgrain Filler" from http://www.CompliantSpraySystems.com . This worked great and after filling and coating with a few coats of Oil based Poly shined like a mirror. The table was in good shape when I got rid of the van about 4-5 years later

Re: Grain filling

#4

Re: Grain filling

mdclor

Mark & Larry,

Thanks for your responses. I do have some time to order product and experiment, but not a lot. I have seen varying reports on both products so think I will keep looking since there was no consensus. In any event, I will report back with my results.

Merle