Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Spraying white Lacquer Questions

Posts

Spraying white Lacquer Questions

#1

Spraying white Lacquer Questions

Barry Irby

I am painting a laundry cabinet white. Its made of poplar and Birch. the face frame of the cabinet and the frames of the doors are poplar and the panels in the doors are birch. I am using white lacquer in rattle cans. This is proving to be interesting. Anyone that thinks paint will hide you sins is mistaken. Every microscopic defect in the grain shows worse than with clear finish. So, would it have been smart to spray on a coat of clear sanding sealer before the white? I have a spray gun and it is about ten times faster than the cans, but I don't have any white lacquer for the gun. Any suggestions would be appreciated. This is not great art, its a cabinet for a rental property I am working on.

Re: Spraying white Lacquer Questions

#2

Fill

Mark Mandell - Gone Round In Jersey

your grain. In this situation, a skim coat of joint compound will work. Sand lightly to remove the excess, then apply two more coats of paint.

Re: Spraying white Lacquer Questions

#3

What Mark said, then Seal-Coat or sanding sealer

Tim Greif - West of Chicago

should make a suitable base for your spary finish. I've used it successfully. I sort of prefer the higher solids of Rustoleum as a grain filling topcoat, but it dries much slower than lacquer or Krylon.

Re: Spraying white Lacquer Questions

#4

Re: Spraying white Lacquer Questions

John Lucas

I use spot putty from the Automotive store. I paint the wood with one coat which or course shows up all of the defects. Then I fill them with the spot putty and sand it smooth. I spray it with something like gray primer to cover up the spot putty and show any more defects. Once it's perfect I spray with the paint I want.

Re: Spraying white Lacquer Questions

#5

Jesper, Denmark

Re: Spraying white Lacquer Questions

Jesper, Denmark

Plus a semi gloss finish is more forgiving.