Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Rockwell band saw

Posts

Rockwell band saw

#1

Rockwell band saw

K Anderson

I have found an old (not sure what year) Rockwell band saw for sale locally. From the pictures it looks like it is in good shape and they are asking a fair price.

My question is that it has a 1/2 hp motor, is this going to be way too small? It does not have a riser block now but I would add one if I could find one for it. One reason I would want it would be for the occasional resawing job, is a 1/2 hp motor going to be enough for that?

Thanks

Re: Rockwell band saw

#2

Re: Rockwell band saw

Howard Norman

I don't think that a 1/2 hp motor will be large enough for resawing.

Re: Rockwell band saw

#3

Re: Rockwell band saw

Neal in San Jose

I have a 1/2 hp motor on my 14 inch Delta with riser, and it works fine. It does slow down if resawing really thick stock, but I just let the saw find it's own speed and don't try to hurry things. If you are the impatient sort, a motor upgrade is very easy. A sharp blade with the proper tooth count and configuration and well tuned saw is a lot more important than brute horsepower.

Re: Rockwell band saw

#4

Re: Rockwell band saw

Bob Lang

That era is before the days of horsepower inflation, I don't think you'll find it way underpowered. Worth a try, and if it doesn't cut it, then you can upgrade. Riser block should be the same as most Deltas.

Bob Lang

Re: Rockwell band saw

#5

Re: Rockwell band saw

del schisler

No that will not be big enough for larger resaw stuff. I would get a 1 1/2 at least and that would be good. Now get a good resaw blade . Their are lot's of them out their and their's are the best i tried a few and have settled on this one It is from this place they don't put prices on the web site call them and they will give one and make sure if you get the riser the blade will be 105" . Their price are just as good as the rest but this blade will cut anything you send thro. The way i have my delta is with a 3450 rpm with a 1" pully and a 6" on the saw. that way you get the most HP out of it. I used iron pully's from Browing co. With daul belt's . I like that way just me. good luck

Re: Rockwell band saw

#6

Re: Rockwell band saw

kellyanderson72

Thanks, I was hoping someone with a similar saw would respond with real world experience.

Re: Rockwell band saw

#7

Re: Rockwell band saw

kellyanderson72

That is what I was thinking. I was hoping for at least 3/4 hp but you have to take what you can get. Thanks

Re: Rockwell band saw

#8

Re: Rockwell band saw *LINK*

Bob Lang

I'm a bit fuzzy on my dates, but I think the "Rockwell Period" was from the mid-50s to the mid-70s. I had an earlier Delta Milwaukee model of that machine that pre-dated value-engineering. The later Rockwells weren't quite as heavy, but compared to today's machines they had heavier castings and better overall quality. At the least, you'd have a pretty good saw with good bones. You might need to replace bearings, but if the price is right you'd have a good machine. The guys over at Old Wood Working Machines will help you find out how old this one is. In my opinion, the older the better.


OWWM-vintagemachinery.org