Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Sofa table shelf *LINK*

Posts

Sofa table shelf *LINK*

#1

Sofa table shelf *LINK*

mdclor

I have been commissioned by LOML #2 to make a sofa table similar to the one in the link. However, in place of the steel stretcher, she would prefer a shelf. What are the preferred methods for attaching a shelf? My initial thought is to run a pair of wooden stretchers with short spindles between them. This would provide a "shelf", but would avoid the movement and strength issues associated with a solid shelf. Other thoughts or suggestions?

TIA,

Merle


FWW Sofa Table

Re: Sofa table shelf *LINK*

#2

Re: Sofa table shelf *LINK*

Jesse Cloud

Looks like a fun project Merl!

I did what you suggested, but with slats instead of spindles (just because I don't know how to turn) and it has worked fine for 6 years.

Here's an article that shows a few ways to skin the cat.

Hope you will share pics of the build and the final project!


FWW on table shelves

Re: Sofa table shelf *LINK*

#4

Re: Provide a pic? Link needs FWW memership?

mdclor


Sorry about that. I thought the article was in the public area.

Re: Sofa table shelf *LINK*

#5

Make It Easier

Mark Mandell - Gone Round In Jersey

Forget the shelf. Structurally, it's not needed, and stylistically, I think it's out of place.


Re: Sofa table shelf *LINK*

#6

Re: Sofa table shelf

mdclor

Jesse,

Thanks for the link. I had forgotten this article. At this moment, I am leaning toward the frame and panel solution suggested in the article.

I may have used the term 'spindles' incorrectly. I thought that narrow square slats were sometimes called spindles in A&C style construction. But you are correct that I used slats. In any case, I want to avoid that look in this project for something a little more 'elegant'.

Regarding the shop shots, we will have to wait and see. :)

Thanks, again,

Merle

Re: Sofa table shelf *LINK*

#7

Re: Make It Easier *LINK*

mdclor

Mark,

I'm with you on that. I love your table and had even proposed Stickley Sofa Table 89-857 to her. Maybe I can convince her that a cleaner look is better. ;)


Stickley 89-857

Re: Sofa table shelf *LINK*

#8

Re: Make It Cherry

Mark Mandell - Gone Round In Jersey


Re: Sofa table shelf *LINK*

#9

Re: Make It Cherry

mdclor

That is beautiful figure in the cherry, but I already have the qswo legs made.

Re: Sofa table shelf *LINK*

#10

Re: Make It Easier

Bruce, a MN Galoot

If you do go with the shelf, I'd vote for a frame and panel. But failing that, it's easy to stick in rails and lay a shelf on top of that. I've done that as an option on several night stands of essentially the same construction and style.

Re: Sofa table shelf *LINK*

#11

If You Must

Mark Mandell - Gone Round In Jersey

Have a shelf [SWMBO rules ;) ], use an m&t stretcher between the end legs. Then you have your choice to m&t the shelf into the stretchers with a peg in the center like this

or m&t one or two long stretchers into the leg stretchers and lay your shelf on top. Were it me, for a long and narrow shelf I'd use 1 stretcher down the middle and use three screws up into the shelf. That would allow the shelf to expand and contract, yet hold it firmly in place

Re: Sofa table shelf *LINK*

#12

Re: If You Must

mdclor

Mark,

That is a really interesting approach. Due to the length, I might use 3 stretchers and only attach the shelf to the middle one.

Re: Sofa table shelf *LINK*

#13

Stretchers

Mark Mandell - Gone Round In Jersey

One long one is enough. The other two won't add anything except the ability to rattle against the shelf if you get movement that creates a gap.