Shelix Update
Tony - memphis
Well, I got an email reply from Byrd, but it wasn't much help. They never answered my reply with more questions.
So, this weekend, I removed every insert, cleaned off the burr (the burr was where the cs was machined for the insert screw) with a blue diamond mini stone, and re-installed them using a inch-lb torque wrench to the 55 in-lbs as directed. That seems to have cleared up the lines. The scallos are of course still there (that's part of the deal), but they seem more uniform and less pronounced. So, I think I am where I should be with the head now. I'm pretty dissapointed with their quality control. These burrs should have NEVER made it through QC. On a subjective note, the inserts seemed like they were no all torqued consistently, but that's just how it "felt" to me. I think I mentioned before that there were metal shavings still hanging on from machining. Those were black oxided too! My last test was tiger maple and there was no tearout. After sanding with 240, the surface looked pretty good and the scallops were gone (or at least to my fingertips).
So, we'll see how it goes from here. I will miss the glass smooth surface from new knives, but I won't miss having to change knives frequently and having to shift nicks around. I am expereiencing snipe again. Wondering if that has anything to do with the difference in cutter head diameter? I'll work on getting the tables adjusted this week. The heigt gauge needs adjusting too.
Oh, one last note - please wear safety glasses when tightening carbide inserts - I had one snap and it sent shards flying. Not sure what happened, but I guess one out of 40 ain't bad. I was being very careful.
One last thing, I assumed the burr was preventing the insert from resting flat on its seat. That was verified by the grease pattern on the seat when the inserts were removed. The grease was no uniformly distributed under the insert. That tells me there was a gap.
Tony



