Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Shop Security issues - long

Posts

Shop Security issues - long

#1

Shop Security issues - long

Carol Reed

The large free standing building I call shop -24' x 36' - is far enough away from the house that I am concerned that I cannot hear someone lurking about.

Concerns are that methhead robberies are notorious in this community. I do a bit traveling, leaving the cat in charge. Hopeless, I know. :rolleyes:

Pertinent information:

- One double wide overhead garage door on an opener

- One 32" 'people' door with deadbolt

- Two 4' x 4' slider windows on adjoining walls, one of which I cannot see from the house.

- This is a rental property - want something I can take with me.

- I have an old [read slow] laptop that I can dedicate to this project, if need be.

- Or a newer, faster desktop I am not currently using. Would need battery back up though.

- Distance from shop to house ~120 feet.

- Brain of the security system can live in the shop, but I would like an alert, either via phone or

email

- Local response to alarms is measured in hours, so not interested in paying for a 'service'

What I will do is to install interior solid (plywood) shutters on the windows to stymy curious eyes.

Features I'd like:

- Motion detection alerting unauthorized entry

- Disguised cameras, motion detectors, mikes, etc.

- Recorded unauthorized activity, sufficient to be useful to law enforcement

- Wireless communication

- Powered and/or monitored by a laptop - built in battery power, in the event commercial power

is interrupted

How you can help:

- Websites to check out

- Examples from your own systems

- Overview of what all is needed - help design an intelligent system

- Should an audible alert sound as well, knowing they are generally ignored?

Not necessarily looking for the cheapest solution. To replace what is in the building would top $60K, without the car or bike. And yes, it is insured. But, so what? It never is for full replacement value. That is another battle I can do without.

Re: Shop Security issues - long

#2

Security trivia

Pat Evans

Any system should include both infrared beams at openings and motion detectors. Beams can be detected and avoided so you need motion detectors. Motion detectors will be useless if something is left in front of them... inadvertently or otherwise.

Re: Shop Security issues - long

#3

Re: Shop Security issues - long

David Yoho

Carol, this is not in line with what you're asking exactly but you might find it helpful all the same. I noticed in your posting there are numerous points of possible entry and that you're renting. Perhaps I can give you a cheap but effective way of securing one of those entry points - the roll-up door.

This will hopefully come across in a way in which you understand me, as it's going to be hard for me to describe. If need be, I can take and post a picture.

I have my roll-up door secured with a simple pad lock I place on the door's roller track. My track is shaped sort of like a "C". I drilled a hole through the top (or bottom) of the "C" that I could put my lock through. Location of this hole has to do with the location of the rollers. The hole needs to be close to one, thereby limiting how much the door will lift before stopping. I located it so if the door was jimmied and the main lock is compromised, the door would not raise enough for someone to get under it.

Your door size dictates you would need one on each side to secure it. However, when you move, just take the locks with you and nobody will notice the holes.

Re: Shop Security issues - long

#4

Guy I know

Mark Mandell - Gone Round In Jersey

Did this "on the cheap."

Hooked up a motion sensor to switch on a tape plus some spot lights. Tape was him yelling "Ha! Been waitin' for YOU, suckka!" followed by the unmistakable of a 12 ga. being cocked.

He swears it's chased more than one. :D

Re: Shop Security issues - long

#5

Re: Guy I know

Tom Dunlap

The sound of a pump shotgun will cause people to stop in their tracks.

Re: Shop Security issues - long

#6

The first thing

Mike Farinella

I would do Carol is go to WalMart and buy a motion detector exterior light. Mine cost about $15. Might want to put one on the back of the house too. I like the indoor shutters feature. You might want to beef up the windows with some metal bars. See if your electrical panel is lockable (don't know if that is a code violation). Too bad the property is not fenced. If it were, a BIG dog would help a lot.

Good luck and have a blessed New Year! I promise I will stop by soon.

Mike

Re: Shop Security issues - long

#7

Don't forget...

doug f, san clemente, ca

Carol - you're getting some good advice here; I especially like Mark's "system"!

Don't forget to include some sort of fire detection/alarm in the system; nothing can ruin your day like a fire in the shop. It's often more devastating than a burglary. DAMHIKT

Good luck with your project.

Doug

Re: Shop Security issues - long

#8

David Barnett

Seriously...

David Barnett

Given what you've thoughtfully and lucidly outlined and what your security issues are, I'd recommend reading Digital Video Surveillance and Security:

http://www.amazon.com/Digital-Surveillance-Security-Anthony-Caputo/dp/1856177475/ref=pd_sim_b_11

This well-written book addresses all the digital aspects of monitoring in a way that's accessible and doable to skilled DIYers and pros alike. Read a few of the Amazon reviews and see if this is something for you. It is pricey.

What it does not cover are personal security and safety issues. For example, you have a cat, so dogs are probably out. Catching someone on video is not the same as protecting oneself should a face-to-face encounter ensue while working or moving to and from the shop. Methheads are fairly unpredictable, impulsive, desperate and not likely to be clearheaded when surprised. Property's one thing, survival trumps it. It's unfortunate, but monitoring, while useful and desirable (I monitor), is just one part of a viable security plan.

For example, my shop is attached to and permeates much of my living space. There's no walk to an outbuilding. My response envelope is rather immediate. My community is very low-crime as regarding intrusions and casual burglaries, so my strategies and choices are likely to be very different from yours.

I rarely leave my house, so avoiding and managing surprise encounters, however unlikely (they can happen, of course), are highly important to me. Given your house to shop distance, when you are home, lighting will likely be more important to you. This is stuff not to be taken lightly. Worth what you can put into it and afford.

While I can't discuss my own security system and choices on an open forum, I'll be glad to steer you to resources that you might find helpful if you email me. Let me say here that I would seek training and/or expert consultation. It doesn't have to break the bank, but it's good to have someone who eats and breathes this stuff focus and fit the solutions.

Re: Shop Security issues - long

#9

Re: Shop Security issues - long *LINK*

mdclor

Carol,

I have used FrontPoint for my home for the past couple years. It is monitored, but it will also call or text you if any of the sensors are tripped. It uses a wireless phone connection with a battery backup so cutting power or phone lines does not defeat the system.

They have motion, glass break, water, cold, smoke and carbon monoxide sensors and so you covered for most things. The installation is a snap and you can take everything with you if you move. You can also monitor, arm, disarm your system wherever you have an internet connection. They have security cameras as well although I don't have any myself. Take a look at the link for more info if you are interested.

Full disclosure-if you sign up with them and use my name, I get a free month. Bottom line, I am happy with them and would recommend them to anyone. I got a 5% homeowners insurance reduction when I notified my insurance company.


http://www.frontpointsecurity.com/

Re: Shop Security issues - long

#10

Re: Shop Security issues - long

Carol Reed

Thanks, David. I have two padlocks and that I will do soonest.

Re: Shop Security issues - long

#11

Re: Seriously...

Carol Reed

Better mail me, David. I show no email address for you.

Re: Shop Security issues - long

#12

Got mom's on Ebay

Ray - Middletown, IN

It has window sensors, door sensors, and motion detectors. When triggered her bedroom light goes on, an alarm sounds, and it calls me. I have a remote so I can turn it on or off depending. I think I paid around $120 for it 3-4 years ago, and, it still works. They had other options but for her application we didn't need them. (outdoor cameras, etc)

Ray

Re: Shop Security issues - long

#13

Re: Got mom's on Ebay

Carol Reed

Interesting. Company name?

Re: Shop Security issues - long

#14

Re: Shop Security issues take 2

Carol Reed

Learning some things and that is the point here. Do the obvious first. Double lock the garage door when I am gone. Install the interior plywood shutters to frustrate peepers. Get a dog.

Getting a dog is not going to happen but creating the illusion of a large dog on the premises can be done. Rather than have a wailing alarm no one reacts to anyway, a recording of vicious barking from within triggered by sensors might be a place to start.

Some have questioned my readiness to confront a perp. Not me! I am a wimp. Do have a shotgun though. I am looking more for a deterrent. The word gets out. Maybe down the road cameras and recorders might be wise. We'll see. Like I said, just trying to learn some things here.

Re: Shop Security issues - long

#15

Re: Shop Security issues - long

Jim Hager

Not to take away from what David has told you but you can do the same thing by clamping on a couple of vise grips to the rails. They are easy to put on and take off and provide the same kind of restriction to opening the door from the outside plus you don't have to have a key to get them on and off.

Re: Shop Security issues - long

#16

Re: Shop Security issues take 2

Galen Vetterick

The use of guns to protect property will most likely end up putting YOU in a room with bars. Guns are to protect people NOT property. Well I guess they do have wood shops in some prisons though.

For the man door and shutters they make strap brackets you lag screw into the studs both sides of the opening and then just slid in a 2x4 across the door or shutters. Takes more than a kick to shear a 2x4!

That leaves only the garage door for exit and they make locking mechanisms for them both keyed or paddlelocked.

Get a pet skunk and let him roam the shop and just forget the shutters and locks. You want to make him visable.

Re: Shop Security issues - long

#17

Actually...

John in NM

Nevada is reputed to be quite strong on the Castle Doctrine, though I'm sure Carol won't take anything to that extreme :D Though in such a case, one might want to consider a taser, it's more likely to be used, being (usually) less than lethal. Should the trespasser get hold of it they (probably) can't kill you with it either.

Thinking along the "dog illusion" lines, maybe a water bowl and some scat in the yard :D Chewed up raggedy Anne doll under a bush? :D

Usually, thieves are looking for a quick smash and grab with little risk. Slow them down or make it a bit risky and they'll hit the neighbor instead. I like the shutters, but I'd look at making them stout enough to deter entry as well as view - those sliding windows are notoriously un-secure. How about a steel strap lag bolted into the door jamb on the inside, spanning the deadbolt socket. Seen lots of doors kicked in even with the deadbolt. There's only 3/4" of punky pine jamb securing the bolt, so a piece of steel strap distributes the load a bit.

Re: Shop Security issues - long

#18

Re: Shop Security issues - long

Ron Jones

If security is the goal I believe that the padlock(s) in the track will be better than other devices for keeping an overhead door closed. Bad guys can remove other things as easily as you can.

Re: Shop Security issues - long

#19

Re: Actually...

Carol Reed

Thanks, John. I'll get a piece of steel for the door. Evidence of a dog in the yard is pure genius. Will work with everyone except the neighbors.

As for the sliders. Right now there are curtains (not mine) on the windows. Plan to leave them there. The shutters will be mounted behind them, reinforced with a stout 2x4 on heavy brackets. Window brackets and door steel will be lagged in. Any thoughts with regard to the hinge side of the door? It does open inward and I can install 3" screws. What do you think?

Re: Shop Security issues - long

#20

Re: Actually...

John in NM

I usually take out one screw from each hinge and run a 3 or 4 inch screw in it's place, through the jamb and into the framing. I originally started doing this to help prevent sag with really cheap jambs and then realized it's an easy way of fortifying a little bit. Got to be careful though not to pull the jamb out of whack, there should be a shim behind each hinge, but you never know if the installer knew his business or not. The door itself is probably stout enough not to need longer screws, but you could swap in a few 1.5 to 2 inch ones if you like, cheap and easy.

That reminds me, the deadbolt strike plate should have a thick plate behind it with 4" screws going into the framing - you could have a look for that, might save you the trouble with the steel strip. Those plates have come with the lock for as long as I remember, but I never seem to find them installed :D

The shutters sound like just the thing.

Re: Shop Security issues - long

#21

Re: Got mom's on Ebay

Ray - Middletown, IN

I don't remember but I will try to research it and let you know. Each sensor has its own battery and transmits back to the base. If your shop is fed from the house you may be able to monitor the shop from the house by using the AC wiring for signal transmittal.

Ray

Re: Shop Security issues - long

#22

Found it

Ray - Middletown, IN

My remote is laying right in front of me, on the back it says www.x10.com and a quick check confirms that is the place.

Ray

Re: Shop Security issues - long

#23

Keepin' Them In

David Yoho

The whole idea of using a pad lock in the track to stop the roller is not so much about keeping them out as it is keeping them in! Should they gain entry through one of the other points, what's keeping them from rolling up the big door and rolling out all of my equipment?

Re: Shop Security issues - long

#24

Re: Shop Security issues - long

Larry Clinton At Frankfort, (Central) Indiana

Carol, my shop is detached but only about 6' from the rear entrance of the house, I installed the motion detector security light on both my house and shop. I do carry a 45 and have several other guns available at hand. By the way I believe you can purchase Homeowner's insurance that does cover full replacement of any lost items. You may want to check on the availability and cost.

Re: Shop Security issues - long

#25

Re: Shop Security issues - long

Thomas Skaggs, Foothills of Mount Level

Carol,

I don't know if somebody else mentioned this but since I just changed locks on my shop door I'll share what I learned from our veteran locksmith:

"people doors" are the favorite points of entry. A steel door with either no window or small window the best. It's all about the deabolt. A locking handle is worthless and usually broken right off. For that reason he recommended a lever type handle with no lock. That's practical for coming in our our with stuff in your hands.

As for the deadbolt....heavy duty....not one from a big box as they are poorly made in "Asia" and all the "heavy duty" words on their packages mean nothing. Spring for a type 2 grade commercial quality.

But wait! If you have a wooden door jamb you need to buy a steel reinforcer for the jamb. The one I got was heavy steel, about 3' long. You might have to drill the holes for your deadbolt bolt. It screws to the jamb with large 3" screws. A good deabolt won't keep them from smashing through the jamb.

I can't speak to the electronic stuff but I prefer to stop them from getting in in the first place. Above is the sage advice from a real pro.

BTW....If the "heavy duty" locks at the big box stores are so good, why don't they use them on their own store doors? Think about it!

Tom