Re: bathtub
Mark Mandell - Gone Round In Jersey
I helped a friend install one in his elderly parents home. The one we installed did not have either a heater or hyro-massage so we did not have to deal with special home-run GFCI circuits and code inspections (we were replacing an existing fixture in place). We did, however, have to "sister" three floor joists because, when full, the tub, without an occupant, weighed more than 200 lbs. and the 2x6 joists in the old(er) house might tend to sag under the point-load. We also put in a hand shower for rinsing as well as for cleaning the tub.
As I remember, the unit we put in took at least 75 gals. to use as a tub, more when full. That's a lot of water use compared to a regular tub bath. Aside from the concern over hot water draw, that's a lot of water to drain into a septic system all at once as you risk pushing solids into the leach field which is not a good thing. If you have sewer, that's not a concern.
Haven't heard from the friend that his parents like or dislike it as a tub. Since we designed the install as a sit-down shower as well, don't know if they even use it as a full immersion tub.