Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

First Project from New Shop

Posts

First Project from New Shop

#1

First Project from New Shop

Thomas Skaggs, Foothills of Mount Level

Well, from the realm of "and now for something completely different"...the first project from the new workshop. I'm still trying to finish the interior of the new shop along with organizing. But I had a request that had a definite timeline.

For decades, my church has had a set of Nativity figures but has never had a stable for them. So they asked me to make one. I figured it was a weekend project.....wrong! Turns out the figures were larger than I remembered!

So the stable is 6' long and 3' high. The trick I found was making it look old and weathered. I had some rough textured cedar ply so I used that. I tinted it with an analine dye mix.

The size makes it heavy so I created carrying handles on the base. I installed a hidden light to illuminate the figures.

Yes, the bad photo was taken in my shop. No, the baby will NOT be displayed in swaddling bubble wrap at the church! ;-)

Tom

Re: First Project from New Shop

#2

Re: First Project from New Shop

PaulSV

Wow, the "weathering" is amazingly good! Congrats!

Re: First Project from New Shop

#3

Re: First Project from New Shop

George Colonel's Workshop-Havertown PA

Mery Christmas Tommy,

That brought back some very happy memories of a time when my Dad and I made a similar stable for my grade school room. We made it from a couple orange crates. That would have been about 63 or 64 years ago, and it still makes me smile.

George

Re: First Project from New Shop

#4

Re: First Project from New Shop

Bill Houghton, Sebastopol, CA

Nice job. I don't know if it's a trick of the lighting or not, but it appears that the back wall of the interior isn't weathered. If this was intentional, it was the right decision for two reasons: first, it's accurate (interior wood doesn't weather as much as exterior); second, it makes a dramatic backdrop for the figures.

Re: First Project from New Shop

#5

Re: First Project from New Shop

Thomas Skaggs, Foothills of Mount Level

Thanks,

I felt a solid back would provide better structure. The material was different and took the dye differently. Also, I did change the formula for the exterior. While not completely intended, it did work out well.

Thanks again!

T.

Re: First Project from New Shop

#6

A.J. Hamler

Re: First Project from New Shop

A.J. Hamler

Your new shop looks great, Tommy. But doesn't it get cold in there with that front wall missing? I see you've hired some helpers, but where are all your tools?

Wait, that is your new shop, right?

Re: First Project from New Shop

#7

I'm busted

Thomas Skaggs, Foothills of Mount Level

Ok....I feel really bad. You are correct, the photo is actually of my workshop. I will feel the Lord's wrath for trying to pass it off as the stable of the Nativity.

I really thought I could afford more space but as you can plainly see, I fell short of funds before the 4th wall. It appears that until I can afford a sizable addition I will be relegated to crouching inside and whittling.

Sorry for the confusion. ;-)

Re: First Project from New Shop

#8

Alan Young

Pretty mangy looking work there Tom!


Re: First Project from New Shop

#9

Re: I'm busted

frank ashmore

Stable place to start from NM