Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

19 Dec 2011

Good morning everyone,

It's cool and rainy here, which is out typical winter type weather. I've been playing bass guitar with a couple of groups for Christmas music. I played yesterday with a small string orchestra and band, about 15 members, and that was a really enjoyable time. It's great to see people's faces light up and join in the Christmas cheer and the kids bobbing and weaving to the music. Really puts true joy in ones heart.

Well, this is "crunch week" for many that are late shopper and woodworkers that are still working on projects for gifts or woodworkers that put it all off until the last few days before Christmas. :)

Here's to a successful week for each of you. May your homes and families be very blessed this Christmas season.

That's it for me, so what did YOU do this past weekend?

Best of weeks and safe holiday travels to each of you.!!!!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

john lucas

Well I had to photograph 800 people at graduation Saturday but after that I went into the shop and started working on improving the dust collection for my new miter saw and my older lathe.

I'll post photos of the miter saw station. It's sort of jury rigged right now with the saw sitting on a Stanley shopmate but that will have to do for a month or so. I've built a sort of wooden hood to go around it and will put loose plastic curtains on the front to help contain the dust. The plastic curtains should let me swing the saw for mitered cuts. Eventually I will build a cabinet to hold the saw and possibly make the dust collection a permanent part of the cabinet but for now this will have to do.

I picked up some heater duct work to modify for my lathe dust collection. I've been working with a jury rigged set up for 5 years now and really need to improve on that. It will be after Christmas before I get it done but I have a major project coming up early January and really need to contain the dust and shavings much more efficiently than I can now.

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Allen Bryant - Bumpass, VA

Last coat of finish on this year's Christmas present for the kids. Just going to let it sit for a couple of days and install the top and the drawer hardware and this project will be done.

Re: WC Weekend Accomplishments....

#4

Small shop upgrade

Ray - Middletown, IN

I bought my table saw (Sears) used back in 1972, new fence in the 80's, sliding table in the 90's, but the time has come for it go. I got a small 6" Delta (36" table) back in the early 80's and it is now time for it to go also. So Sat. I drove 90 miles through the snow and ice and picked up a Powermatic 66 saw with 50" fence and an 8" jointer with 72" table. Projects probably won't be any better but I will feel better doing it. Now to go clean off snowflake rust.

Ray

Re: WC Weekend Accomplishments....

#5

Re: Small shop upgrade

Carol Reed

Snowflake rust? What, no tarps?

Enjoy, and Merry Christmas. Nice loot!

Re: WC Weekend Accomplishments....

#6

Woodstove!

John in NM

We ran into Albuquerque Saturday and bought the class A chimney and stove pipe so we could finally get the woodstove going in the new shop/guest house. Ever notice how construction slows on really cold days? Got it all installed yesterday and built a roaring fire while it was still warm enough to open the windows (new stoves smoke a bit until the paint cooks or something).

Also found a good use for those nice stringy planer shavings - they start a nice fire :D

Stove has great draft, not quite up to Bert and I standards (points to any non-downeaster who gets that :D ), but fire starts easy and burns hot with the damper open.

Re: WC Weekend Accomplishments....

#7

Re: WC Weekend Accomplishments....

Stephen Kirk

I finished my Christmas toy build, that was the main push. I was also busy cutting up lots of firewood - the line maintenance teams came through and gutted a chunk of my front property line, so I lost a bunch of trees but gained a lot of firewood. Just gotta buck it up, split it and stack it. Bucking up is still ongoing.

Finally got to start straightening up in the shop, too. Found my bench, I can see the table saw extension wing, etc.

Hope everyone else is doing well.

Re: WC Weekend Accomplishments....

#8

Re: Small shop upgrade

Stephen Kirk

You may find things will improve more than you think. I moved from a 1980s Craftsman contractor saw to Jet Xacta (little brother to the Powermatic) and I see a definite improvement. Instead of fighting the tool it just does what it's supposed to, settings are always perfect, never lacks for power.

Enjoy that saw, it's quite a nice early Christmas present!

Re: WC Weekend Accomplishments....

#9

Bench Assembly, Planning, and Polyanna

George Colonel's Workshop-Havertown PA

Good Afternoon Dennis,

As everybody describes theirs, our weekend was crammed with too many things to do in too short a time. Some of the kids came up from Silver Spring/Alexandria in advance of the Polyanna Party hosted by #2 son this year. So it was a round after round of home made snacks, exotic beers, and laughing playful grandchildren at various times and venues. I did assemble the two white oak dining room benches to check final fit and detail, and have decided on a couple design element additions in addition to the end panels which have yet to be made. That white oak is almost too pretty to color, but it will eventually form a part of the existing dining room furniture which I built some years ago.

While putting the benches together, I decided to re-arrange the basement into two rooms, eliminating one shop room and using that space for an office/computer area. The resulting single room will accommodate all power tools, and improve use of my neanderthal bench, and put my table saw and jointer near the middle, thus eliminate the need to move it nearly every time before use. I plan to ask #3 son Ken to do the job. $$$permitting, I can even put in a small powder room. The Polyanna Party was a huge success. It was one of those evenings when I never stopped laughing/snacking/eating/amd beer drinking. SWMBO drove home. Have a wonderful week, Dennis. And Happy Christmas.

George

Re: WC Weekend Accomplishments....

#10

Re: WC Weekend Accomplishments....

Dave Bair, Eaton Rapids, MI

It was a very satisfying weekend; I put the last coat of finish on the gunstock I've been working on and reassembled the old Stevens 240 db. This was one of my grandfather's 1930's shot guns that I've been meaning to restock for at least 15 years but never got around to. One of the problems was that one of the firing pins was broken and I couldn't find a replacement. I tried again and found a gun smith who said he could turn a new one for me from a punch for about $60.

I also have my Grandfather's 1950 Craftsman metal lathe sitting around (I turn dowels on it sometimes). I took a long screw driver bit (a hex bit from a kit that came with one of my drill/drivers), detempered it, and mounted it in the chuck. I haven't turned metal in at least 40 years, but I was able to get a duplicate firing pin on the first try. I retempered it and installed it. I was afraid it might be too brittle, but a few test firings later and it still works.

Re: WC Weekend Accomplishments....

#11

Re: Small shop upgrade

Larry Clinton At Frankfort, (Central) Indiana

Congratulations Ray, sounds like you got some great equipment. I looked at the PM when I bought my Unisaw. Only reason I bought mine was that they had a special on it and I picked up the Uni with extension tables and mobile base for the same price as the PM and General cost without the options. What joiner did you get?

Re: WC Weekend Accomplishments....

#12

Re: Small shop upgrade

Ray - Middletown, IN

Got an older Sunhill with 4 knife head. Am considering upgrading that but am not sure yet. The PM was a used piece also, been looking for almost a year now and wouldn't you know they both came up from different people in the same town.

Ray

Re: WC Weekend Accomplishments....

#13

Re: Small shop upgrade

Ray - Middletown, IN

Forecast was sun and it was until 30 mi up the road then every bridge for the next 60 mi had a wreck on it. One of those little Indiana winter challenges. A little Wd and steel wool and everything is good.

Ray

Re: WC Weekend Accomplishments....

#14

I hope so, did a test run today

Ray - Middletown, IN

and noticed there is no vibration or rattle and bang like I was used to. I think I can get used to this.

Ray

Re: WC Weekend Accomplishments....

#15

Re: Small shop upgrade

Yonak

Remember that old bumper sticker : "S*** Happens" ? ..Well, luck happens too.

Re: WC Weekend Accomplishments....

#16

Re: Small shop upgrade

Thomas S Stockton

I saw one of those stickers with the letters about a foot high. It was on a cattle truck and trailer, you don't want to tailgate those guys because it does happen all over your car.

Tom

Re: WC Weekend Accomplishments....

#17

Re: Small shop upgrade

Barry Mabery

Ray, I'm sure you will be very happy with the PM66. What vintage (or color) is yours? Motor HP?

Barry

Re: WC Weekend Accomplishments....

#18

Re: Small shop upgrade

Ray - Middletown, IN

It is a 3hp gold. The fence says Powermatic III and I'm sure that helps date the machine but I don't know what it is. Most of what I found were 3ph machines and I didn't want to make the conversion or run a VFD, I will save that for another project I'm working on.

Ray

Re: WC Weekend Accomplishments....

#19

Re: Small shop upgrade

Barry Mabery

That sounds terrific - a major step up from the Craftsman. Yours is also of recent vintage, although the 1966 (first year or so of production) that I acquired is in generally great condition. It's hard to wear these babies out because there's so much cast iron in them.

Single phase machines are definitely a lot more difficult to find. Mine was listed as three phase but as soon as I saw it, I knew it wasn't because the motor had capacitor "bumps", which a 3 Ph doesn't have. The nephew who was selling it for his uncle assumed it was 3 PH given the plug on it. Apparently, the uncle had used only 2 of 3 phases to run the 220 volt single phase motor which worked out well for me as the "3 Ph motor" had a lower than usual selling price.

Barry

Re: WC Weekend Accomplishments....

#20

visited daughter, made car port

Bill Tindall

I didn't know it before hand but it was planned that a car port was to be built upon my arrival for the extended weekend. Well, it was better than Christmas shopping. I do wish that I had brought some tools that would have been handy.