Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Queen to Twin Bed

Posts

Queen to Twin Bed

#1

Queen to Twin Bed

Tomm

I am building the four poster bed featured in Woodsmith Vol. 33 #195. It is a queen sized bed that I plan to downsize to a twin. The mattress size for a twin is 39" x 75". Does the opening in a twin size bed need to be larger than the mattress size? If so, how much larger? I guess what I am trying to find out is if there is a standard size for the opening in a twin bed. Thanks for your help.

Re: Queen to Twin Bed

#2

Re: Queen to Twin Bed

David Yoho

There may well be a standard for each size of bedding - I don't know. What I've done in this situation each time is start with the dimensions of the box spring and mattress, and add a little to the width and length to get the finished inner frame measurements. I usually add two inches to the inner length and width, which allows for an inch all the way around. Certain styles of frames may require more or less leeway, it just depends.

Re: Queen to Twin Bed

#3

I Concur with David

George Colonel's Workshop-Havertown PA

Good Afternon Tomm,

I've built two beds over the passed two years and have used David's thinking each time. Adding a little space to the length and width of the mattress/box springs provides a bit of extra room for bedding and tucking. My wife likes not to have her wrists pinched or confined by bed structure and bed clothes' bulk.

George