Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Advice on planer repair DW733

Posts

Advice on planer repair DW733

#1

Advice on planer repair DW733

Guillaume Dery

Hi all,

In my haste and stupidity I cranked the height adjustment of my planer with the cutterhead lock engaged. End result, a severely misaligned cutterhead. (great for creating wedges). I jsut called dewalt and they quoted me $225.00 which is about 1/3 of the price of a new planer!

A friend mentioned that this was a known problem and I could find info on the net. No such luck. Does anyone have info on this? Is this something I could fix myself (I am fairly handy), should I bite the bullet and pay, should I use this as an excuse to get a european stile combo machine?

Would ideally like to be able to fix myself so that it can tide me over until I can afford new tooling.

Re: Advice on planer repair DW733

#2

Re: Advice on planer repair DW733

john lucas

I'm not familiar with the model per se but I would certainly try to fix it yourself. could be as simple as a loosening a setscrew on one of the gears that drive the threaded shafts, realign the head of the planer and tighten it back up. unless something is actually broken I can't imagine it would that hard to fix.

Re: Advice on planer repair DW733

#3

Here is the parts  *LINK*

Dustmaker Mike

Brake down should be easy to do yourself.


Parts

Re: Advice on planer repair DW733

#4

Re: Advice on planer repair DW733

Larry Clinton At Frankfort, (Central) Indiana

I have that planer, although I haven't used it in a few years due to obtaining a 20" stationary. The repair should not be that hard, I would certainly open it up and inspect it prior to spending that kind of money on it. If you have an indicator or even use a block and shims to measure, unless you have broken a shaft, I can't see how it would be a real big job. I would doubt that even replacing a broken part would be that hard. By the time you include shipping you will approach the price of a new planer. You may find a used planer on cragslist for that amount - possibly even a newer model or small stationary.

Re: Advice on planer repair DW733

#5

Re: Here is the parts

Guillaume Dery

Wow, thanks a million. That definitely goes in my bookmarks list.

Guess I'll spend some quality time taking it apart once the baby and SWMBO go to sleep

Re: Advice on planer repair DW733

#6

Re: Advice on planer repair DW733

Guillaume Dery

You are right on approaching the price of a replacement when all is said and done. I think I will be fiscally responsible and take it apart to repair it.

I think deep down that I am trying to talk myself into a European style combo machine. The idea of having a 12"+ jointer is just hard to pass up. Specially since the combos are cheaper than a NA jointer alone of that same size. I can always sell off my current jointer and planer (a GI heavy duty 6" and a DW733 respectively). Perhaps my cranking with the cutterhead lock engage was a subconscious act of sabotage.

Re: Advice on planer repair DW733

#7

Re: Advice on planer repair DW733

John Lucas

I think you need to convince your wife that it is beyond repair and you have to step up to the DW735. :)

Re: Advice on planer repair DW733

#8

Re: Advice on planer repair DW733

Dick Coers

I have that machine, sitting right next to my Minimax combination machine. I hate cranking around on the thickness planer table to change the setup over on the combination machine for just a couple boards. 200 bd ft is a different story, but I don't process that quantity too often. If you didn't strip the threads in the cutter head, the fix should be simple. Do you see metal shavings around the elevation threaded rods? Does the head slide around on the threaded rods? Even if you did, I bet you could get a machine shop to repair them with inserts if you look into it. Maybe those threads are something unusual, I didn't count threads per inch. Under the bed, I think you just have gears and basically bicycle chain. Easy stuff to fix under there.

Re: Advice on planer repair DW733

#9

Re: Advice on planer repair DW733

Chad P

FYI - Even with a large combo machine you will likely want to keep the lunchbox planer,... it just comes in handy for small items. I have an electric drive combo (makes switching over functions easier) and even then sometimes its just easier to use the old ridgid lunchbox.