Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

My new old router

Posts

My new old router

#1

My new old router

Charlie Lenz

I was in our local used tool store this afternoon to get a 1/4" mortise chisel and bit and stumbled on this old router that appears to be in very nice condition for it's age, and complete with the wrenches and Manual, something you don't always get with used tools nowdays, especially the older ones. It's a Black and Decker Industrial 2720 Type 1, later known as the ELU 2721, and then the DeWalt 610. I think that it will be a great little router for free handing, and to use with the dovetail jig. It's fairly small in size.


img

Re: My new old router

#2

Re:  My new old router 


img

Re: My new old router

#3

Re:  My new old router 


img

Re: My new old router

#4

Dale Lenz

Re:  My new old router

Dale Lenz

I've got the Elu one, great little router, it's my go to. Ordered a few parts a few months ago, think for the rack and pinion assembly. When you figure out how to keep the wood dust out of the R&P assembly let me know, use mine in the router table mostly, tried several things and nothing seemed to work, guess it's not engineered for a router table, :). Had an old 1980 Craftsman router with the same R&P but it was covered, no dust jams in the R&P, actually a pretty nice router, I rebuilt it maybe 3X, before I sprung for the Elu.

Re: My new old router

#5

Dale Lenz

Re:  My new old router

Dale Lenz

After seeing your rear pic of the router it refreshed my memory, it was the threads in the wing nut broke off, used a over the counter nut for a while. Got the whole R&P assembly and some extra brushes, think I paid something like 35-40 dollars, probably more than what you paid for the nice used router, congrads on the find.

Re: My new old router

#6

Re:  My new old router ( Dale )

Charlie Lenz

Dale, there was a dust collection rig on the router that I'm beting someone fabricated out of thick clear plastic, I'll take a pic of it tomarrow. As far as the price, I paid $38 for the Router, plus tax. I thought that I came out pretty well.

Re: My new old router

#7

Dale Lenz

Thanks...

Dale Lenz

I'll be looking forward to the DC, :).. PS, I'll give you 39 dollars for the router, :).

Re: My new old router

#8

Re: Thanks...

Charlie Lenz

This is the dust collection accessory that someone made for it, whoever did it didn't do too bad of a job. With the router sitting up, this is how it sits in the router, the left side bolts to the top of the base plate. $39 for the router ? I dunno, I'd hate to sell it, I think it's going to be a eally handy router to have around. I have a PC 890 in a router table, and a DeWalt 635 3 hp plunge, it's a little on the bulky size for some tasks. Plus I don't know if you could afford the custom dust collection accessory that would have to go with the B&D. LOL


img

Re: My new old router

#9

Dale Lenz

Re: Thanks for the reply...

Dale Lenz

but I was talking about a shield that covered the Rack & pinion area. In a router table fine wood shavings get caught in the gears and make adjusting a little difficult and over time will deform the gears. Althought the vacuume device would help.

Re: My new old router

#10

Re: Top View

Charlie Lenz

This whole unit sits between the router motor and the router base, and is screwed in place at the bottom of the router base plate. The hole is 1 1/8" for a vacuum hose I don't plan on useing this dust collection accessory.


img

Re: My new old router

#11

Re: Thanks for the reply...

Charlie Lenz

I noticed some dust in the gears on this one, I just took a brush and swept them out, and everything looks good, it raises and lowers freely, doesn't seem to be much play in it at all. Maybe blowing it out with compressed air occasionally would help also.

Re: My new old router

#12

Dale Lenz

Re: Thanks for the reply...

Dale Lenz

It would help to blow out the gears prior to adjusting the depth control but, it ain't gonna happen. If this set of gears last me 20 years as the last ones did, my kids can have it or put it in a garage sale. I've tried waxing, graphite, metal tape over the gears, naw, ain't gonna work, needs a sheild like my old Craftsman had. Anyway, thanks for the pics. I looked on Ebay last night seen a few Elu/B&D router but not as clean as yours, once again good find!