Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Rockwell Bladerunner

Posts

Rockwell Bladerunner

#1

Rockwell Bladerunner

Tom

Anyone out there have experience with this tool? Would appreciate any views. Tx, Tom

Re: Rockwell Bladerunner

#2

Re: Rockwell Bladerunner

Barry Irby

I should stay out of this because I actually have No Experience with this tool, but I did watch the video at Lowe's. To me it looks like a jigsaw/saber saw/ bayonet saw whatever you call it turned upside down in a table. Sort of like making a table saw out of a portable circular saw. Can not imagine it will survive in the market. Here today, gone in a month.

Re: Rockwell Bladerunner

#3

Re: Rockwell Bladerunner

Tom

Thanks, Barry. I haven't seen a video nor a demo at Lowe's but my first impression agrees with yours. I really don't need a tool like this, but as a "toolaholic"it caught my eye!!

Many thanks for your reponse! Tom

Re: Rockwell Bladerunner

#4

Re: Rockwell Bladerunner

frank ashmore

Had Sears router table back when I first started ww that you could hook up a jigsaw under it.Thats what it reminded me of

Re: Rockwell Bladerunner

#5

Re: Rockwell Bladerunner

Tom

Thanks, Frank. Think I'll pass on this tool!!

Tom

Re: Rockwell Bladerunner

#6

Re: Rockwell Bladerunner

JMOHNIKE

I have made what I call Poor Boy. It is nothing more than a 1/4 sheet of plywood with legs. I mount a power handsaw under it and have places for a router and a jig saw. It does have a rip fence and a plug with an on/off switch. It seems as if I can do everything on it (and more) that the bladerunner can do. So I would suggest that if you just have to have one make your own.

Re: Rockwell Bladerunner

#7

Re: Rockwell Bladerunner

Dave in Bryn Mawr PA

Tom: You've made up your mind - good. Why would anyone want this when you can have a band saw?

Re: Rockwell Bladerunner

#8

Re: Rockwell Bladerunner

Tom

Reply to all--I was in Lowe's today, saw one and that was enough for me! Even though it was marked down (obviously they are not selling well!) it is not a very robust tool. So as suggested, I stick with my band saw and a very fine blade.

Thanks for all the advice!

To

Re: Rockwell Bladerunner

#9

Re: Rockwell Bladerunner

joy

You can go my website and there is a lots of reviews about Rockwell Bladerunner.

http://rockwellbladerunnerreviews.net

Re: Rockwell Bladerunner

#10

Re: Rockwell Bladerunner

Tom

Thanks, good info but I have decided not to buy one at this time.

Tom

Re: Rockwell Bladerunner

#11

Re: Rockwell Bladerunner

joy

You are welcome:)