Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Adding a light to a router

Posts

Adding a light to a router

#1

Adding a light to a router

Thomas S Stockton

Hi all

I was at my local tractor supply store and they had these really cool little flashlights. I thought it would be a great addition to my Bosch colt router so i stuck a couple of pieces of velcro on each to attach them and it works really well. The light beam is pretty narrow but I can aim it with the goose neck. I use it mostly for inlay work where I'm cutting up to a scribed line.

As an added bonus this model has a laser, which we all no improves any tool no matter how useless it is and believe me this one is completely useless.

Tom


Re: Adding a light to a router

#2

Not so.......

Bill Tindall

The laser can be used to direct the cleaning lady to places she has missed while dusting the shop, while you continue with the inlay work. The efficiency is clearly apparent. Detached from the router, additional pointing tasks can be imagined, not to mention driving a cat insane.

On a more serious note, I think the lack of adequate lighting seriously limits the utility of routers for all sorts of precision free hand routing tasks- inlay, hinge mortises, dovetail wasting, etc. Your lighting idea deserves a prize. Do submit it to the magazines and if they don't award it a prize it will be apparent the judges don't so much routing.

Re: Adding a light to a router

#3

Agree Wth Shop Cleaning Lady Concept

George Colonel's Workshop-Havertown PA

SWMBO threatened to give me a prize.

George

Re: Adding a light to a router

#4

Re: Adding a light to a router

Mark Mandell - Gone Round In Jersey

Terrific!

Next time I go near that jernt Ima git me one!

Do they have other colors? That metallic green fights with the Bosch blue a bit. ;)

Re: Adding a light to a router

#5

Re: Adding a light to a router

Mike Rubes, Apex, NC

Hi Thomas,

About 20 years ago, my very first router was a very basic Craftsman. It worked well for a number of years before I "upgraded" to a Bosch and a PC routers. That first router had a built in light up by the bit and I have always thought it would great it my other routers still had it. I never thought of the obvious solution that you came up with! Thanks for the idea :)

It was a good router that I gave to a young guy just starting out making furniture and I sometimes wonder what became of it.

Mike

Called it a night in the woodshop in Apex, NC

Re: Adding a light to a router

#6

Re: Adding a light to a router

Thomas S Stockton

Mike

My wife probably had that same router, very basic but the light was a really nice addition especially on a fairly inexpensive tool.

Tom

Re: Adding a light to a router

#7

Re: Adding a light to a router

Thomas S Stockton

I worked with a guy who wouldn't buy Bosch tools because they were blue, he always said I just wouldn't understand and I always said that was why God invented spray paint.

Tom

Re: Adding a light to a router

#8

Contact paper is good, too

Bill Houghton, Sebastopol, CA

just don't cover the vents.

Re: Adding a light to a router

#9

Blue

Mark Mandell - Gone Round In Jersey

Just no accounting for taste :)

Re: Adding a light to a router

#10

Re: Adding a light to a router

Neal in San Jose

My first router was also a Craftsman with a handy light. The problem with the light is that it was a 12 volt bulb that burned out regularly. There must have been a small transformer, or some other way to get the required 12 volts, and I think the inrush current from the router starting caused the voltage to surge way above 12 volts every time the router started causing the bulb to immitate a flash bulb. Sears wanted about the price of a new router for replacement bulbs, but I soon discovered that an automotive stop light bulb would fit right in. It was a nuisance to have to replace the bulb about every 10th time I used the router, so it was often "inop".

I'm gonna swing by HF and pick one of those thingeys up for my PC. Thanks for the tip.

Re: Adding a light to a router

#11

Re: Not so.......

eliot d

I agree: I can never see what I'm cutting with a router. With guides and jigs it's not much of a problem, but other times I wish I had a light like yours. Great idea!

Re: Adding a light to a router

#12

You need one of these to clean *LINK*

Dustmaker Mike

your shop. Or maybe not


Shop Cleaning