Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

finish for birch plywood

Posts

finish for birch plywood

#1

finish for birch plywood

eliot d

I 'm in the process of making a pair of audio speakers from furniture grade birch plywood. Can I think of it as just birch wood for finishing purposes? I was thinking of tung oil to bring out the grain followed by multiple coats of Waterlox varnish. What do you think? I was very happy with this combination on some select mahogany (which of course isn't birch.)

Re: finish for birch plywood

#2

Re: finish for birch plywood

Bill Tindall

Birch ain't mahogany. Oil won't do for birch what it does for a darker wood. It is plain as dirt and white. If you just finish it with a finish that will yellow, like oil, you will have a sickly yellow speaker. If you want it natural, finish it with a non-yellowing finish and forget the oil. Or, stain it, but the veneer is hard to stain without it going blotchy.

Most important....practice on a scrap piece first to get it to suit you.

Re: finish for birch plywood

#3

Re: finish for birch plywood

eliot d

Bill. Very useful post! I'll go with a water based non-yellowing finish.

Re: finish for birch plywood

#4

Re: finish for birch plywood

eliot d

Bill, my impression is that the least yellowing finishes are water based. Is this accepted as mostly true? If so, can you suggest a brand that you think will work well on birch? Are there some good non-yellowing oil based finishes, as well?

Re: finish for birch plywood

#5

Re: finish for birch plywood

Steve Schoene

Waterborne acrylic will yellow less both initially and over time, though it isn't nearly as durable as the oil based varnish. Birch will still be pretty bland, and will also yellow naturally over time. As Bill mentioned, birch doesn't take common stain very well, but it can be dyed without much problem, especially if light shades are used to take off some of the yellow. The important factor is where these speakers are going to be used. You may also want to consider that using MDF instead of ply may be better sonically, because it is denser. MDF can be veneered to give a finished look.

Re: finish for birch plywood

#6

Re: finish for birch plywood

Bill Tindall

Chemically the acryllics are non yellowing as well as the aliphatic urethanes. Water based finishes are typically nonyellowing, but not necessarily. I have almost no experience with water based finishes so I have no recommendation other than to ask the customer service department for the product you consider. General Finishes has good customer service as does Target Finishes.

Re: finish for birch plywood

#7

Re: finish for birch plywood

del schisler

If you stain birch plywood you better use this blotch control or you will have a bad looking board. Go here and watch this video. I have used this on all my item's and it is the best blotch control out their. the link

http://www.youtube.com/profile?user=InTheWorkshop#p/u/36/IfCYMdrP8rM

Re: finish for birch plywood

#8

Re: finish for birch plywood

eliot d

Great tip! I just ordered some. But I'm still not sure what to put over it for birch. What do you think would look good?

Re: finish for birch plywood

#9

Re: finish for birch plywood

del schisler

My self i wouldn't use what they call rattle can spray finish . Deft is to soft. and i don't know about the other's. I spray lacquer all the time i use HVLP sprayer for all my jewelry box's and trink box's. I have made around 500 so far i set up at craft's shows. I would go to a shermon william's store if you have one close buy and see what they have. Now when you put the blotch control it will raise the grain some what you need to sand lightley with 320 or 4oo is what i use and make it smooth. than what i use is a sanding sealer first then the top coat. If you know someone that can spray for you i would do it that way. My self i wouldn't use any oil . That is just me and charles doesn't like it eather i been doing wood stuff around 50 yrs and charles for 47 yrs. Of course you can finish any way you want. Their are lot's of idea's out their. This is the way i do it. good luck