Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Bad smell when cutting Baltic birch ply

Posts

Bad smell when cutting Baltic birch ply

#1

Bad smell when cutting Baltic birch ply

Stephen Kirk

I grabbed a sheet of baltic birch ply from woodcraft so I could make some small parts for toys. As I used a hole saw to drill out some wheels, I started getting a not so nice odor. Hard to describe, other than it didn't smell like wood. It was a hard job and I was getting some burning in the cut which I thought had caused the odor.

Anyone else experienced odor problems with bb ply? I see a lot of toys made from the stuff, and for small parts it's much tougher. But, I'm not sure if I want kids having something which could be harmful. I do intend to finish all the pieces.

Re: Bad smell when cutting Baltic birch ply

#2

Re: Bad smell when cutting Baltic birch ply

Ken Oakley- Sunny St. Cloud, Fla.

A bad smell from machining Baltic Birch is not uncommon. I am pretty sure it is the glue used between the plys getting hot.

Re: Bad smell when cutting Baltic birch ply

#3

Re: Bad smell when cutting Baltic birch ply

Barry Irby

I think Ken is right, its either the glue in the plyes or the sugars in the wood burning. Any chance it smell like burn sugar? Either way, not a health issue once it cools down.

Re: Bad smell when cutting Baltic birch ply

#4

Probably formaldehyde in the glue