OT-Building with plastic *LINK*
Tom Dunlap
Of course, this isn't PlasticCentral so my question is Off Topic 
I've got a plan in my head for building a camper that will go onto a pickup.
Some people are using 2" foam sheeting with plywood skins for their walls and floors. Covering the whole works with canvas then paint. this is similar to airplanes and wood/canvas canoes.
My idea is to use plastic sheeting for the skin and dimensional, maybe round, tubing for the frame. Right now I'm in the 'vaccum' stage...sucking in as much info as I can find.
This has been done and the camping trailer worked very well. The goal is to have a unit that is waterproof and rot proof. Typical campers have lots of seams that leak at some time leading to rotten frames inside the walls.
Since plastic is being used for decks, siding and fences the mfgr. must be engineering the materials for UV degrade. But, sometimes they miss the mark and the materials fail.
Does anyone have long term experience with exterior plastics? I've seen siding on houses that looks saggy or shattered. Maybe that's an installation issue or from a bump. On the other hand I've seen some really straight runs of horizontal fencing too. No sag...so someone must have this dialed in.
The link is to one possible design that I might follow. The camper would be low but have a pop-top or hinge up section to make it a standy. For decades I've used vans for camping so I am too familiar with hunkering.
This is another concept:
http://www.mikenchell.com/forums/viewtopic.php?t=27592&postdays=0&postorder=asc&start=0
If you're interested in trailer building, take a look here:
http://tinyurl.com/Tear-drps-tiny-trlrs
Search for 'Foamies' if you want info on foam sheeting builds.
Pop top



