Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

Posts

Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#1

Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

Charlie Lenz

I have this saw and it appears to have seen very little use. The motor sounds like the cooling fins are hiting something, but doesn't appear to be the case from what I can tell. I've had the motor and the gear box thats attached to it apart, and didn't see anything out of the ordinary. Put it back together and it still sounds bad. I guess that I'll have to take it apart again and look it over a little closer. But in the meantime, has anyone else here had the same experience with this model of Hitachi ? I've looked for complaints on the net about the saw and came up with nothing.

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#2

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey m

John McGaw

Was the sound of the saw ever different from what it is now? The way you worded your question makes it sound as if you might have just bought it. Could it just be that the universal motor noise is simply worse than you expected? I had once a lightweight Ryobi saw and it made more noise than any big machine in my shop now but it was completely normal for that saw and that motor type.

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#3

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey m

Charlie Lenz

John, I just bought it as a used saw. It looks like it has seen very minimal wear jugeing by it's outter appearance, and very minimal wear on the top and fence surface. The guy I got it from didn't seem too mechanically inclined. I've had these types of saws before, except in a cheaper benchtop version, and I work in new home construction sites, and I feel that most of these types of saws are glorified circular saws in a cabinet, and they sound that way also. Which I agree, is alot louder then any belt drive machine in my shop. But as I mentioned, this one sounds like the fan blades are hitting something, but theres no wear on them, or in the houseing.

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#4

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey m

Jesse Cloud

I don't have a Hitachi, but I had a similar experience on a different machine. The clearance between the fan blades and the housing was tiny. Even though couldn't see anything wrong, I gave it a couple of taps with a hammer on a chunk of wood. Problem solved.

Can you run the saw without the fan housing just to test it?

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#5

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey m

Charlie Lenz

Jesse, I was thinking the same thing. I can pull the arbor and a bearing out of the gearbox. If it still makes the noise, then it's comeing from the motor.

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#6

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey m

Charlie Lenz

Well after inspecting the motor and gearbox a little closer, I noticed some wear on the gear on the motor, and some wear and a bad spot on the gear in the gearbox. Hitachi does not sell the individual parts to fix it, you must buy the whole drive assembly together ( motor and gearbox that looks very similar to a motor houseing on a circular saw ) at a whoping $300. In other words the saw is disposable. This is my first Hitachi and will be my last.

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#7

Re: If it were mine

Larry Clinton At Frankfort, (Central) Indiana

I would clean the gearbox - fill it with heavier lube - even up to mixing some wheel bearing lube with a heavy gearbox lube. Might quiet it down and work for a long time. These saws are considered Job site tools and the lube that is used by the factory and recommended is rated for the saw to be used at a fairly wide range of temperatures including low temps in winter. If you are using it in a heated shop it will never get cold enough to "gel" the lube. Besides what do you have to lose?

Re: Hitachi C10RA3 10" Jobsite Table Saw, noisey motor

#8

Re: If it were mine

Charlie Lenz

Larry, thats basically what I did the last time that I put it together, filled the gearbox with fresh grease after cleaning it out. Like you said, what have I got to lose ? I'm just going to use it when an outdoor project around our home comes along. When it dies it's done, then I'll salvage some parts off of it, such as the three prong electrical cord, power switch, hand wheels, the fence and rails, miter guage, nuts, bolts, etc.