Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Pre-Finished Plywood

Posts

Pre-Finished Plywood

#1

Pre-Finished Plywood

John McGaw

I've been getting back to work on my perpetual remodeling and will soon need to do some more cabinet building. The concept of pre-finished plywood is interesting but I'm at a loss to figure out what to do about the edges. I don't like face frames on cabinets and that leaves me with edges of sheetgoods to worry about. If I'm working with unfinished material I can just apply veneer tape or wood strips and then when I finish everything gets treated the same. If I was using pre-finished plywood that would leave me with the problem of how to treat the edging so that it blends in successfully. I certainly can't be spraying catalyzed lacquer just on edges -- if I had the equipment for that I'd just spray everything and be done with it.

Any way out of my dilemma or do simply keep on doing it the way I have been over the years?

Re: Pre-Finished Plywood

#2

Re: Pre-Finished Plywood

Thomas S Stockton

John

You can buy pre finished edge banding, it works well and can be applied with an iron. There is still a small edge unfinished after trimming and edge breaking but a quick application of a little wax make it disappear.

Tom