Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

don't be a stupid as I am!

Posts

don't be a stupid as I am!

#1

don't be a stupid as I am!

eliot d

I like to make my own picture frames, and I like to cut in a groove for a contrasting color inlay. But , duh, I cut the grooves first. Then when the inlay strips were cut a fraction too wide to fit, instead of widening the grooves a smidgen using the table saw , which is really easy, I fooled around forever gradually removing tiny amounts with a plane from the strips. Dumb!

Re: don't be a stupid as I am!

#2

You are not alone....

Barry Irby

I made a table to put on my Performax to turn it into a "Sand Flee" knock off. You flip open the top, set it in place and sand away. Works great. Had to have dust collection, but the chute was pointing almost straight done. Spent a LONG time fabricating a low profile fitting to sit on the outfeed belt and connect to the port on the cover. Much later I realized I could have saved myself A LOT of trouble by simply raising the sanding drum. This is not even the latest dumb thing I have done.

Re: don't be a stupid as I am!

#3

Re: You are not alone....

eliot d

Well, I suppose we live and learn. :\

Re: don't be a stupid as I am!

#4

Two different statements of a useful idea

Bill Houghton, Sebastopol, CA

“Experience is something it would have been very nice to have, just before you needed it.”

and,

"Good judgment comes from experience. Experience comes from bad judgment."

Just think how much you learned about how to plane small parts.

Re: don't be a stupid as I am!

#5

I find myself.....

Barry Irby

at the end of one of these events thinking "there is a lesson in this, I wonder what it is?"

Re: don't be a stupid as I am!

#6

That's the way I've been doing it...

Dale Lenz

for at least 20 years. Over size the splines, keys, and hand plane to fit. A well hand plane surface is the best for glueing. Wish I could hand plane the "mortice" that the spline fits in.

Re: don't be a stupid as I am!

#7

Re: don't be a stupid as I am!

TomD

Hmm, as I was reading into that, I was just thinking that would be perfect for a plane. I just hold a block plane in one hand, pinch the strip to the blade, and pull from the center out. I also have a plane that does the wall of grooves.

Re: don't be a stupid as I am!

#8

Often more than one lesson


Re: don't be a stupid as I am!

#9

You want a side rabbet plane *LINK*

Bill Houghton, Sebastopol, CA

Made by Lie-Nielsen, Lee Valley, Woodriver (Woodcraft), and available on the used market from Stanley (two versions), Preston, Sargent, and others. Link below is to one review of Lee Valley's, with some comparisons to other makes.


http://www.inthewoodshop.com/ToolReviews/TheVeritasSideRabbetPlane.html

Re: don't be a stupid as I am!

#10

Thanks, Bill

Dale Lenz

Will reread later, need to get to bed, but, a quick look over and I need a depth or about an inch +, I build flag cases with relative deep splines. From what I could see the side planes only went 1/2".