Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Shop likes / Dislikes

Posts

Shop likes / Dislikes

#1

Shop likes / Dislikes

Allen Bryant - Bumpass, VA

I am in the beginning phase of designing my new shop. I know that the first thing most people say when asked about their shop is the size of the shop. That I have decided on it's going to be a 24x24 shop. The size is based on several factors including cost to build and maintain as well as location on the property and local zoning laws. This is still bigger than the 18x24 I had at the old house and huge compared to the 16x14 I'm working in now.

What I would like to know is what features of your shop would you do again if you built a new one and what features would you not do again.

For instance My old shop had a concrete floor, this one is going to have a raised wooden floor, both for comfort and access underneath for electrical and dust collection.

Re: Shop likes / Dislikes

#2

Moses Yoder

Re: Shop likes / Dislikes

Moses Yoder

I would make mine dust free and self cleaning if I were to do it over. It would be well worth the money. Saturday I was showing a friend my tool collection and found out most of them have a fine layer of dust on them. Very irritating.

Re: Shop likes / Dislikes

#3

Re: Shop likes / Dislikes

Dave Bair, Eaton Rapids, MI

I'd make about 50% of the walls windows, especially on the north side.

Re: Shop likes / Dislikes

#4

Re: Shop likes / Dislikes

paul in AZ

-Oversized door(s).

-Floor flush with sidewalk or whatever is outside with no door frame threshold so that I could wheel or drag things in and out. Or a ramp.

This doesn't come up often as a need but when it does I wish I'd thought of that when building the shop.

-More electrical outlets than you think you'll need. These are like closet space. Never enough.

I also second the natural lighting. I put as much [fixed panes] at 6 feet high to ceiling as I could get on my north wall. That left me with the wall below to do what I want.

Re: Shop likes / Dislikes

#5

Re: Shop likes / Dislikes

Pat Evans

I'd have a separate, soundproof, well ventilated room for my dust collector and air compressor.

Re: Shop likes / Dislikes

#6

Re: Shop likes / Dislikes

woodenleg

I would use 12 ga. wire for all of my runs that where 110v., I have found that I what to put in a new box but the wire close enough is 14 ga. (lighting). Have 3 way wired lights for passage and for shop, my shop is divided into 2 bays I wished I had wired the 2nd bay 3 way. I also wished I had put some type of overhead hoist. In my shop the best thing I did was to put in a bathroom and water. I wish I had put in a washer for rags and really dirty clothes.

Good Luck and send some pics has you build. Dave

Re: Shop likes / Dislikes

#7

Re: Shop likes / Dislikes

Allen Bryant - Bumpass, VA

I had that on my old shop, will definitely do that one again

Re: Shop likes / Dislikes

#8

Re: Shop likes / Dislikes

Pete in Holland MI

1) Outlets 50" off the floor (spare plywood leaning in the walls won't obscure the plugs.

2) Main switch for all the outlets mounted high next to the incoming door. One flick, and all machines are dead.......if you have young curious hands in the house.

3) Discharge blower up high to expel solvent fumes.

4) Thick wall covering of wood/plywood/OSB so things can be screwed to the walls. Drywall is not a good choice for a "working" shop.

5) Heat/cooling thoughts ? Living in an area with temperature extreems? Have a switch in the house to pre cool/heat the building before you venture.

6) Most windows mounted up high for letting in daylight, but not taking up precious wall space.

7) Big slab outdoors of the overhead door for working on large projects in the nice-weather months.

8) Built in compressed air manifold. Plumb properly for condensate removal.

9) Bulk lumber storage plan ?

10) Paint the walls white before you move in.

Some of my thoughts.....

Pete

Re: Shop likes / Dislikes

#9

Just a fine layer of dust??

Jerry Gibbs

I would not make the walls drywall. Use something you can nail or screw into. Jerry

Re: Shop likes / Dislikes

#10

Re: Shop likes / Dislikes

john lucas

Everything Pete said plus I would put a few outlets in the floor in the middle of the room for things like Table saw and other items that I place out on the floor.

One thing I regret is not running a large enough line to the shop. I have 220 but I'm starting to upgrade to bigger machines and changing some to 220. I am going to have to run a new line shortly. I was broke when I moved in and did what I could but looking back and the rising price of copper it would have saved me a lot of money if I had simply done it right the first time.

I'll second the wood wall and lumber storage has always been a problem for me. I have a 24x24 building but I'm looking hard at adding on an addition for storing wood and getting the dust collector and compressor out of the shop.

Re: Shop likes / Dislikes

#11

Re: Shop likes / Dislikes

Barry Irby

There is never enough room, but the stuff expands to fill the space allocated.

Good advice so far.

I have the exterior closet of the Compressor and Dc and It is a great thing.

Dust collection under the floor. Are you rural enough to allow the DC to just blow out back somewhere and you never have to empty the bag again?

Plenty of outlets and lights and windows. Wooden walls, painted white. Slick floor covering that is easy to clean up. Ten foot (+) ceiling.

Compressed air everywhere.

A separate spray booth or at least a curtain you can pull to separate it from the shop.

Be sure to leave space for the PROJECT. Many shops are great until you actually build something in them and the very thing you are building is in the way.

Re: Shop likes / Dislikes

#12

Re: Shop likes / Dislikes

Allen Bryant - Bumpass, VA

I can in fact just blow the dust out the back and not have to worry about it. The 10 foot ceilings are already on my list. The plywood walls is the one that's getting me, the idea is great, I'm just afraid it will push my budget to far, but then again I would have to pay somebody to at least finish if not finish and hang the drywall so in the end it may work out that plywood is cheaper.

Re: Shop likes / Dislikes

#13

Re: Shop likes / Dislikes

John Veerkamp

When I built my shop, 7/16 osb was as cheap as drywall. Check it out.

Re: Shop likes / Dislikes

#14

Re: Shop likes / Dislikes

Bill Turpin in WNC mountains

My biggest problem: the owner refuses to sweep the floor. Put in a system to overcome this problem.

Good advice so far. Put in a toilet and lavatory. Put in at least the lavatory if true drainage is not available! Put in TWICE the lights, outlets, and air taps that you think you need. Replace elbows in air lines with tees and plugs for future growth. Mix incandescents and flourescents for better color rendition. DO NOT USE PVC FOR AIR LINES.If usings hard pipe for air, put a union in the middle of ALL runs. Put lighting on separate circuits from equipment. You want to see that spinning blade after you trip the table saw circuit.

Re: Shop likes / Dislikes

#15

Tall ceiling

Tony - Memphis

My ceiling is 10' and I am really glad. I had originally designed it with 8' outer walls tapering to 10' only in the middle. The builder decided it weas easier and cheaper to just build 10' walls. I'm glad. I have master switches at the door so when I leave, I can shut everything off. Plenty of floor and ceiling outlets (ceiling outlet for air cleaner). I have a high on the wall window (as someone else mentioned) on the south side that is pretty big for lots of light, but I can still use the wall under it. That's all I can come up with. Enjoy your new shop!

Tony

Re: Shop likes / Dislikes

#16

lighting

Bill Tindall

Visit a local large lighting store and get them to determine you lighting needs. They will have a computer program that will enable you to fit the shop with lighting that will result in sufficient lighting where you need it. Windows will reduce the need dramatically. If you are doing detailed work, hand cut dovetails for example, you will be boggled by the amount of lighting you will need if there are no windows or you work at night. And as you get older the amount of light needed will increase. I have 14- 4' fluorescent lights over my light colored bench with light colored walls and unfavorable gray cement floor just to get the minimum recommended for detailed work and at that it is only 40% of the light outside under a shaded porch.

Re: Shop likes / Dislikes

#18

White walls

Bill Tindall

It takes an astonishing amount of light to properly light a shop. White or at least light walls, floor and ceiling will reflect otherwise useless light back to the work area and significantly reduce the needs to primary lighting.

Re: Shop likes / Dislikes

#19

Re: lighting

Allen Bryant - Bumpass, VA

How big is your shop? My initial plan for the 24x24 is 8 - 8 foot T8 fixtures for the fluorescent light. Just wondering how I compare in lighting per square foot.

Re: Shop likes / Dislikes

#20

Re: Tall ceiling -- ABSOLUTELY!!

Bruce, a MN Galoot

My current shop/garage has a 9' ceiling, and I really miss the 10' ceiling in my last shop/garage. If I could have 12' that would be even better. I buy my lumber rough cut, and it always comes in 10' lengths. A 12' ceiling would give me room to maneuver.

Re: Shop likes / Dislikes

#21

Solar heating panels

Bruce, a MN Galoot

I live in MN, and may move back to ND after retirement. Solar panels provide virtually free heat and drastically reduce the power bills. One friend of mine has solar panels on his garage and he reports that they raise the inside temp 50F over ambient outside temp. That's 50 degrees he doesn't have to pay for.

Re: Shop likes / Dislikes

#22

JL

Task lighting, sharpening bench

JL

I have task lighting above my work bench and lathe.

I have general fluorescent lighting for the shop and track lighting (fluorescent PAR light cans) above the work bench and lathe. I really like track lighting.

It is nice being able to point the lights where you want them.

Sharpening bench - I built mine using a shower "liner" as the top - basically a piece of coated tempered hardboard. I can do wet sharpening on the bench.

Makes a difference.

Re: Shop likes / Dislikes

#23

Re: Shop likes / Dislikes

Ed Wesolek

When I built my barn I used the 7/16 for the ceiling and painted it white and then used T-8 light fixtures for the larger area of the shop. I use smaller 2 bulb light fixtures for individual work areas that need the extra light. The side walls I used 1/2 inch plywood and left it natural (sealed) and it makes it easy to hang stuff on the walls.

The floor is heated which is very nice here in Michigan. I also insulated both the sides walls at a R36 then the ceiling at R50 with a ceailing height of 12 feet with fans for both the summer and winter. I asked the same question that you have and a lot of people told me to add windows. I have 19 windows in my shop which makes it very enjoyable to look out as well as enjoy at different times of the year. I got most of my widows at Habit. My total cost of the double pane windows about 500 bucks.

I did plan for the 220 both in the center of the fllor and the side walls with lots of plug out lets not tied into the lights. if I could do something different I would put the exhaust on the vacuum out side to help with the noise factor.

Wood storage I did make several different racks that can take a lot of weight as I seem to attract wood for some reason and I am needing more wood storage space now.

The other thing that we did was paint the floor with epoxy paint. What an easy way to clean up the shop and sweeping the dust into the floor sweeps.

Not knowing where you live I also put an alarm system on my barn. Not to mention a nice sound system as well.

I wish you well in planning for your new space as there is a lot of great advise here to learn from as I have done.

Re: Shop likes / Dislikes

#24

Re: Shop likes / Dislikes

Jesse Cloud

Great thread! Lots of interesting ideas.

Thinking back, I wish I had tried harder to keep the shop dedicated to the actual woodworking process. Buy or make a cheap outbuilding for lumber storage. Attach a closet for that dust collector and air compressor. Don't store gardening or other stuff in the shop. Plan storage for all the little things (hardware, router bits, drill bits, sandpaper, etc etc) totally out of the way of work. Keep it simple and open - I have way too many nooks and crannies that collect dust.

Definitely have a separate area for finishing, so you don't have to wait for varnish to dry before you do any more woodworking....

Plan for a phone, and a computer if you use one. A bathroom is great.

Don't do anything that ties down the location of a machine, think hard about your dust collection design.

Re: Shop likes / Dislikes

#25

Paul Kramer

Re: Shop likes / Dislikes

Paul Kramer

Allen,

I did the raised floor too. It gives you a lot of flexibility. I ran a quad outlet to the center of the floor with a 220. I ran a 100 amp service to the shop. Mine is attached to the garage with 8 foot of doors connecting them. The DC and compressor are in the garage. I hard piped the air system with copper.

I raised the floor 7" from the concrete. First I laid 1 X 2 pressure treated on the concrete then -- in a herring bone pattern -- laid 2 X 6's on edge 12" on center to allow for the most efficient dust collection runs. I topped the 'joists' with 3/4" plywood and then 1/4" hard board. The hard board doesn't dent when heavy tools are rolled over it. I then painted with a light grey color of floor paint to keep the space bright.

I painted my walls a light color too. I have one large (3' high X 7.5" wide) window facing south. I included 2 foot eaves that shade the window in the summer but allow full sun into the shop during the winter. I also put a gable roof with a 12-12 pitch to allow for maximum storage space above and made sure the shop ceiling / attic floor joists were sturdy enough to bear the load. I put in a hatchway and a set of shop built folding stairs to access the attic. I also put in a reinforced anchor in the roof to allow a lifting point for heavy stuff through the hatchway.

Good luck with the planning and building

Paul