We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I'm going to make my wife a rolling step stool for Christmas so she can reach the upper cabinets in the kitchen. I'm having a heckuva time finding spring-loaded ball casters, which will roll when there's no weight on it and the ball casters will retract when she stands on it, on the internet. Does anyone know of a source I could check out ?
Never cared much for most ball casters as they pick up too much fuzz and crud from the floor and get jammed up. Mount your choice of regular casters on a bar and springload the bar. Or you can put springs on a stem type caster. There's simple and cheap options using parts from your local hardware store.
Thanks for thinking about this, Rick. I'm leaning toward your idea of making the spring mechanism. I have checked into compression springs that would go up into the legs.
I have also found a caster from McMaster-Carr that is a spring-loaded swivel-type with a boot that goes down over the caster and provides the support when the spring is depressed, but the diameter of the boot is 4 1/2" and it seems like that would make the bottom of the stool look very bulky. It's going to be a pretty small step stool to start with.
Now there's another facet to this riddle. I was thinking my wife wanted this only for the kitchen, which has a marble floor, but now I learn she also plans to use it in the library which has a carpeted floor, and your warning about fuzz getting into the ball caster becomes even more pertinent.
I'm beginning to think she can carry it from location to location.