Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Expresso stain on Maple.Need some Help!

Posts

Expresso stain on Maple.Need some Help!

#1

Expresso stain on Maple.Need some Help!

Mark

I haven't had much luck getting maple to go really dark when staining. Always too light for me.

I am looking to stain a small maple bathroom vanity cabinet I am making to a dark Expresso brown colour.

Looking for some procedure tips and/or stain recommendations to get there using maple.

Thanks

Re: Expresso stain on Maple.Need some Help!

#2

Ellis Walentine

Dye stain

Ellis Walentine

With dye stain, you can go as dark as you like. Pigment stains don't work as well on hard, close grained woods, because the pigment particles are too large to penetrate into the wood, and you end up wiping them off.

There are all kinds of dye stains out there. Trans Tints are advertised as the most permanent, as are water-soluble dyes. I've also had good luck with so-called "NGR" (non-grain-raising) stains.

Ellis Walentine, Host

Re: Expresso stain on Maple.Need some Help!

#3

Moses Yoder

Re: Combo Dye & Pigment

Moses Yoder

The combination Dye & Pigment stains we get from our local suppliers are the best I have seen for maple. A wood that gets nice and dark easier than maple is White Oak. We have done a lot of Rift Sawn white oak in Onyx stain that comes out great. You could play around some mixing your own dye & pigment combinations, you just have to make sure you have a compatible base.

Re: Expresso stain on Maple.Need some Help!

#4

agreed

Bill Tindall

I never could get ample to stain either until I was directed to the water soluble dye stains. The most stable are based on a chemical structure called "premetallized" dye. The dye stains I have investigated from Mosher (available from Wood Workers Supply) are this kind of dye. If you obtain the MSDA sheet for the dye you can often tell what chemistry the dye is based on and assess its lightfastness from this information.

Re: Expresso stain on Maple.Need some Help!

#5

Bart Goldberg

Re: Expresso stain on Maple.Need some Help!

Bart Goldberg

Mark,

I also suggest you use a combination of water based dyes and pigment stains. The water based dyes tend to give you a more even coverage as they penetrate the wood better than pigment based stains. Here is what I'd do:

1) First, wet and pre-raise the grain of the wood (using distilled water) and lightly sand down with 220 grit and repeat.

2) Then, apply the water based dye and let it dry. Very lightly sand with 320 grit if the grain is still raised.

3) Then, I'd apply a coat of shellac to seal the dye. Zinser seal coat would work well for this.

4) Then use something like Barleys gel stain in your color of choice to add additional color and depth. This is essential adding glaze to your finish. The Bartleys will lay in the grain of the wood. Be sure to wipe against the grain and lightly so as to not remove to much stain. When the Gel stain dries, lightly buff the surface with a soft cloth to remove any residual stain in preparation for applying your finish coats.

You can get the water based dye from Homestead Finishing supplies (Jeff Jewit). You can probably locate a dealer for Bartly's Gel Stain in your area via Google or their web site. Zinser seal coat is sold by the Big Box stores.

Regards

Your BFF

Bart

Re: Expresso stain on Maple.Need some Help!

#6

Go to Homesteadfinishing.

Ray - Middletown, IN

Jeff has already mixed an Expresso that is a combination of dyes and stains. I have used it on several different woods and am very happy with the results.

Ray

Here it is on Maple.


Re: Expresso stain on Maple.Need some Help!

#7

Re: Expresso stain on Maple.Need some Help!

Mark

Thanks some great ideas. I'll give them a try this weekend.