Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

More tool company service stories

Posts

More tool company service stories

#1

More tool company service stories

nickb

I started to hijack Andy's thread about the great service he had with Crescent Tool with an experience I just had, but then I thought it might be interesting to see how many other stories folks had to share (other than the usual from Lee Valley, etc., like the time they tracked me down 9 months later to send me a cover for my power sharpener).

Myself, I just had a great experience with Metropolitan Staple Corp (Eastern region distributor for Cadex pinners). I have a Cadex 23ga pinner that needed the driver o-ring replaced. It's a great tool, but I had started to regret the purchase after I found how hard it was to get parts for it when I had the brainstorm of emailing the regional distributor to see if they sold parts for my nailer. I got a response the same day from the general manager (emails were Friday, I had the o-ring today, no charge). Nice service!

Any other good stories out there?

Re: More tool company service stories

#2

Sorby

Charles Yawn

While using Sorby's ring hollowing tool, I got a super bad catch and the ring snapped off the handle. When I contacted Sorby about repairing the tool, they instead sent me a new cutter. I was not surprised; Sorby has a long-time reputation for fine lathe tools with excellent warranties and service.

Charles

Re: More tool company service stories

#3

Re: More tool company service stories

steve mackay

I've always bought my sander belts fro HF. I know its cheap stuff but for the money of one highend belt I got five for the same price. Well, we all know they are like The BORG. It might be six months before they have what you need. The last belt was burn'n so I bit the bullet and called Griz. I've got two machines but I've never ordered "stuff" from them. The call reminded me of LV. Some kid who MUST have had some instruction annd ACTED like they wanted my money. I got a good deal, good service and I had a BOATLOAD of belts (and snot blocks) inside the workweek. Back up & run'n.

(and now that I've done it, I'll grudgingly admit : Yes, I paid a bit more but they ARE better belts than HF. THERE ! I said it. Happy ?)

Now if that "C-word" band saw will die I can call Griz and order theirs !

Re: More tool company service stories

#4

Re: More tool company service stories

AZ in Colorado Springs

I ordered some items from McFeely's, including a 10" Freud TS blade. I ordered on-line, and when selecting the TS blade, there is a menu that asks what tooth count you want. If you choose the higher blade count, it adds the 12" blade to your cart instead, with no warning. For whatever reason, the prices for 10" & 12" were identical.

When the shipment arrived, I went back to the website to see how I ordered the wrong blade, and figured out what I explained above. I called the customer service number & explained what happened, and the lady I spoke with was very polite & helpful. She asked me to donate the 12" blade to a school or some similar program, and sent me the correct item (which arrived very quickly), & with no additional charges.

Re: More tool company service stories

#5

Paul Kramer

On the opposite side

Paul Kramer

I hung up one of my K-body clamps from Bessey and the following note to Bessey resulted:

I was recently returning one to the rack on the ceiling when suddenly the sliding portion slid down and then off the end of the clamp striking my wrist then falling to the floor where it broke. The part with the acme screw threads in the aluminum (?) casting. There doesn't seem to be an easy way to repair this. How do I proceed?

Their response was essentially: buy a new clamp.

When a casting broke on a Jorgensen Cabinet Master they sent me a replacement for the broken one and two more -- just because I guess.

I think I've purchased my last Bessey.

Paul

Re: More tool company service stories

#6

Re: On the opposite side

A Fera

I am a BESSEY employee and would like to respond to the negative commentary recently posted by Paul Kramer. We did not tell Mr Kramer to simply "buy a new clamp." The clamp was broken because it was dropped. It is important to note that all older and newer K Body have either a dimple on the rail or an end-clip to prevent the sliding jaw from inadvertently falling off the rail (and also for keeping the clamp level during glue up) so...these must have been removed. The inquiry was a request for "How do I proceed?" as it seemed that there was no easy way to repair it. Mr Kramer was correct...there is no easy way to fix a sub-component on a broken sliding jaw for a discontinued product model. We advised him "it is not possible to replace this part" and advised him of possible solutions. If the response were not acceptable we would have tried to find another solution as...that too... is part of offering a quality product.

Re: More tool company service stories

#7

When compared to the other posts...

Bob Hackett

You folks still come off looking not so good.

Ever hear of the saying," Please someone and you`ll be recommended to a friend. Displease someone and the experience will be passed on to at least 10 friends (who will each tell 10 more friends)" ?

Re: More tool company service stories

#8

Re: When compared to the other posts...

Mark Nowicki

They are doing fine.

I don't consider cases where the customer does not get something for nothing or gets preferential treatment as examples of bad service.

In my opinion a customer politely informed that, as a rule, the company does not replace abused or modified products has received good customer service.

Mark

Re: More tool company service stories

#9

Not asking for a free lunch

Bob Hackett

Due to the fact that the model was discontinued I can understand them not having replacement parts but given the cost of these clamps I would have thought that at least the offer of a discount on the newer model would not be out of the question. An offer like that is exactly the sort of thing that would make the difference between keeping a customer or having that customer switch to an imported "guaranteed for life" knock off of the same product.

Re: More tool company service stories

#10

Paul Kramer

Re: On the opposite side

Paul Kramer

A Fera,

In short: the product failed, injured me and then broke when it hit the floor. I did not modify it in any way. I was not pleased to be told it was my responsibility.

Paul

Re: More tool company service stories

#11

Paul Kramer

Additionally

Paul Kramer

I would have quoted the response here but for the following prohibition:

Confidentiality Notice: The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this message you are hereby notified that any use, review, retransmission, dissemination, distribution, reproduction or any action taken in reliance upon this message is prohibited and may be unlawful. If you received this transmission/message in error, please contact the sender and delete the material from any computer and/or server without disclosing it.

which followed it in tiny type face.

Re: More tool company service stories

#12

Re: Other issues involved

Larry Clinton At Frankfort, (Central) Indiana

I have several Bessy clamps estimate 20+, some of these have the new "Tab 0r foot" that snap fits into the hole at the end of the clamp and can be removed to reverse the clamp or to install the Bessy "extender fitting" which I also own. Use of the fitting requires removal of the tab. Several of the rather brittle plastic tabs have broken on my clamps and I don't feel I misuse any clamps. Although the clamps do do a great job of holding assemblies square, I feel the new plastic foot is something of the quality I would expect from Harbor Freight - not on a $50 to $100 clamp. I am missing some of the feet and 2 or three are broken. Three or so years ago at the Indianapolis woodworking show I questioned one of the distributors about replacing these and also about one clamp with a cracked/broken body, the answer was that I would have to contact Bessy direct. Haven't done so as it seems it is a bit of a hassle. I probably will look at other clamps when I buy new.

Re: More tool company service stories

#13

Response from BESSEY

A Fera

Dear Larry Clint: The small tabs should not have broken with removal. Please e-mail us your name, street address and phone number (for delivery purposes) to info@besseytools.com and we will replace these parts. If, in the same e-mail, you could also attach a clear picture of the clamp with the cracked/broken body that will help us to determine which model you have and to offer an appropriate solution.

Re: More tool company service stories

#14

Re: Response from BESSEY

Joseph Mulherin

There, you see, a little complaint here on WC and a reresentative from Bessey came on and is going to correct Larry Clinton's problem. From reading his account of the failure of the knobs/pins on his clamps...it seems to me that is exactly what has happened with Frank Kramer's clamp...and he too should send in a picture and maybe Bessey will replace it too.... Good customer relations do help.

Re: More tool company service stories

#15

Woot-woot!

Bob Hackett

:D

Re: More tool company service stories

#16

Re: Response from BESSEY

Larry Clinton At Frankfort, (Central) Indiana

I do appreciate your response. Tomorrow I will try to get pictures of the cracked housing and some of the broken tabs (I discarded some as they were of no use to me) and will follow up with the email as soon as I have the pics. Thanks again

Re: More tool company service stories

#17

Re: More tool company service stories

Jerry Roberts

Ive been trying to obtain some McCloskey gloss varnish locally here. I found out the local orange borg doesnt carry varnish. Figure that! The blue borg only had one can on display and was some brand Ive never heard of. I called around without much help even a couple Ace hardwares. I finally called the Maitland Ace Hardware (just north of Orlando)and they said they didnt have it but would be happy to order it with no charge for shipping..When I went to order they said I had to get 4 qts. Told them I only needed one. They said no problem, be here in a few days. Today I picked it up and the people at that Ace store couldnt have been more helpful. That store really is the Helpful Hardware Store.

Re: More tool company service stories

#18

BESSEY Response

A Fera

Mr. Kramer - If, at any point we, at BESSEY, have offended I do apologize. In the interests of taking care of your product issue could you please submit clear pictures of the broken product component, the clamp jaw, the handle and also the end of the rail where the tab (aka end clip) would normally reside. Please send the pictures to info@besseytools.com. I do not know if we can offer a better solution beyond what has been provided to you but, I will certainly explore the possibility. The pictures will help to establish which model as well as the age of the product.