Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Joiner

Posts

Joiner

#1

Joiner

JMOHNIKE

I was given a Craftsmen 6 1/8' Joiner mod 113.20693. Does anyone have any information about it.

Re: Joiner

#2

Re: Joiner

John McGaw

Well, Sears still seems to offer parts for it although a manual seems to be unobtainable. This class of equipment should be pretty simple to adjust and use, being not much different than any small jointer of similar age. BTW, it is a 'jointer' nor a 'joiner' which may make online searches more successful.

Re: Joiner

#3

Re: Joiner

Ron in Sterling, CT

I have a Craftsman 6 1/8" jointer, serial #113206931, which includes the legs & motor. The serial # for the jointer only is 113.206801. I bought it new in the late seventies, and it has served me well. I have 2 sets of knives for it - 1 set in the machine, and the other set being sharpened. I have the owners manual for mine, and could get you a copy if need be. Double check the serial # on yours, it seems to be 1number short. You may have the same jointer as mine

Ron

Re: Joiner

#4

Re: Joiner

JMOHNIKE

My delima is if I want to keep it and replace my old Craftsmen 6" made back in the 1950's (I think). It has a rebate cutting table where the newer one does not. The blades on the newer one are much easier to install. On the older one it was get a 24 pack of soda, a few sandwiches and a box of cigars, as I knew that I was going to be there for awhile. Both have the same length table, it might be that only time can make that decission for me.

Re: Joiner

#5

Re: Joiner *LINK*

Bill Houghton, Sebastopol, CA

The forum, "Old Woodworking Machines," which is a two-part forum, should be able to help. I've linked, below, one part, now called "Vintage Machinery," which has the manuals, pictures, etc.

There's also a discussion forum; the main page (the linky below) has a link to that. I think you need to register separately for the two fora; but it's worthwhile, as this is one of the best, maybe THE best, online places for older stationary woodworking machinery.

Warning: read the rules. Some of them are a little different from what you'll find other places (including that appraisals and other discussions of "how much is it worth?" are not OK).


http://vintagemachinery.org/