Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

"Daylight" light . . .

Posts

"Daylight" light . . .

#1

"Daylight" light . . .

steve mackay

Getting chilly here and yesterday the fluorescent fixture in the shop started acting cranky. 10 years old so we'll head trouble off at the pass. Got a new double tube and a pair of "daylight" tubes. WOW ! Doesn't campare with the real thing but I can see in corners I'd forgotten about !

Re: "Daylight" light . . .

#2

Re: "Daylight" light . . . *LINK*

john lucas

Steve I have been buying different CFL bulbs and reflectors for testing for my photography classes. I had 2 of them shining on me last night while I was carving and taking photos of the process. I loved the color of the light and even though they were not much more intense than the overheads the look and brightness made it much easier to see sanding scratches or uneven carving marks.

I liked it so much I'm thinking about using the cheaper versions as task lights when I need to see really well. I think these might work. I have a set and they work great for photography. They may not be as bright as needed unless you have them close to the task at hand. The color is really pleasing.


http://www.alzodigital.com/online_store/cfl-reflector-light-bulb.htm

Re: "Daylight" light . . .

#3

Re: "Daylight" light . . .

Tony - memphis

I've tested several for my shop too. I have the old T12 bulbs. I can tell a big difference in color, but I felt like the amount of light supplied was less with the better quality bulbs. So, I'm torn. I have a mix hung in their right now. When I built the shop, I thought I had more than enough lighting, but I find I could use more. I have 8 double 48" fixtures in a 16 x 20 shop.

Tony

Re: "Daylight" light . . .

#4

more light .

Bill Tindall

I have 14-4' lamps over just my bench to get 200 ft candles of illumination ( a shaded area outside on a sunny day will be 500! )

Actually, if you buy the right lamps the T12's can provide more illumination than the T8's. In addition to brightness there is the color of the light to consider. It is not agreed that "daylight" spectrum lamps provide everyone the ability to see detail better than lower color temperature lamps. I think they do but the brother-in law lighting engineer says it may be all in my head. In any case I think the shop feels better when it looks like a bright sunny day, even though my illumination intensity is way less than a bright sunny day.

Re: "Daylight" light . . .

#5

Jason Roehl in Lafayette, IN

Funny.

Jason Roehl in Lafayette, IN

I, too, have a B-I-L who is an engineer dealing with lighting (electrical engineer who is now a project manager or something like that with Panasonic's lighting division--formerly Universal Lighting Technologies, which bought Magnetek's lighting division that he originally worked for).

Anyway, from what I've read, T8s are slightly more efficient than T12s. I suspect that's why I couldn't find a ballast on the shelf at the store to drive a 4-lamp, 4' T12 fixture at church. So I had to change it to a T8 ballast and lamps (PITA to wire it in--the two ballasts used red, yellow and blue wires, but had different wiring diagrams, so I had to use a continuity tester to see which tombstones connected to which wires, etc.).

At home, in our homeschool area, I have a 2-lamp fixture, and I have two different lamps in it--one each of "daylight' and either "full-spectrum" or "sunlight" (can't remember what they called it). The "daylight" lamp is noticeably a warmer color in the fixture, and the other is cooler, so the fixture looks a little odd, but the combo of the two makes for a very usable light for many tasks.

Jason