Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

old table repair

Posts

old table repair

#1

old table repair

Carol Reed

I lucked into an old white oak round kitchen table on the big center pedestal. It is in fairly decent shape but needs some TLC. The wooden slides are pretty sloppy and I discovered the screws into the table top were loose. The holes may be a big bigger than needed. Question. Is the one fixed member of the wooden slide screwed and GLUED to the table top? It would be a cross gain attachment. I've not removed the slides yet. Is there a way to take some of the slop out of the slides?

Also, the top boards are no longer glued to one another. The tops are held on by the attachment of the circular apron, the glue blocks being sound. Consequently there is a slight droop of the tops.

How should I proceed? I can post pictures, but that will take a bit. Still getting used to the MacBook.

Re: old table repair

#2

Re: old table repair

Bill Tindall

screws into the table top were loose.......important to fix this issue.

Is the one fixed member of the wooden slide screwed and GLUED to the table top? No

Is there a way to take some of the slop out of the slides? The slide slop won't be important when you get everything else tight.

Re: old table repair

#3

Re: old table repair

Bruce, a MN Galoot

posting pics from a mac is easy peasy.

Take your pic and load it into iphoto. Highlight the pic and click on FILE at the top. Choose EXPORT. A menu will appear. Choose MEDIUM size (that should size it correctly for WC) and click EXPORT and another drop-down box will appear. Pick a name for the image and put it on your desktop. Click EXPORT and then you will find the pic on your desktop.

Then go through the regular routine on WC to post a msg and upload the image from your desktop. It's a lot easier than it sounds.

Re: old table repair

#4

Re: old table repair

Carol Reed, Pahrump, NV

Thanks, Bruce.

Now I need to find my camera cable and download the pictures from the camera. LOL!

Moving is SOOO much fun. I know just where everything is. NOT!!

Re: old table repair

#5

About those screw holes....

Barry Irby

Carol, I have been refurbishing a bunch of residential doors lately in the house I have been fixing up. Lots of wallowed out screw holes in the hinges and locks. I hit on the idea of making a bunch of 3/8" plugs out of similar wood (Pine in my case) and then I drill the holes out with a 3/8" bit and glue in a plug. The plugs are "side" grain unlike a dowel. If you have a plug cutter this seems to be really fast and easy and has worked perfectly so far. If you don't have a plug cutter or drill press, I could send you a few made of oak or whatever.

Re: old table repair

#6

Re: About those screw holes....

Carol Reed, Pahrump, NV

Thanks, Barry. That is a good idea. And I do have a plug cutter and even some oak, though it is red, rather than white. Thanks also for the offer to make plugs for me. You are a good guy!

Re: old table repair

#7

Re: About those screw holes....

FredD

End grain plugs like Dowels will hold the screws much better without cracking.

FredD