Neat Article--drill a square(ish) hole *LINK*
Jason Roehl in Lafayette, IN
Some video, some lay explanation, some math.
Jason
Drill a square hole
Knowledge You Can Build On — Est. 1998
Neat Article--drill a square(ish) hole *LINK*
Jason Roehl in Lafayette, IN
Some video, some lay explanation, some math.
Jason
Drill a square hole
Re: Neat Article--drill a square(ish) hole
Larry Barrett
And here is how you can do that using hand tools! (thanks to Stephen Shepherd)
http://www.fullchisel.com/blog/?p=121
Re: Neat Article--drill a square(ish) hole
John McGaw
Neat. I noticed right away that the Watts Brothers Tool Works which makes the tooling is in Wilmerding, PA, the place where I went to high school. I guess that means at least one company survived the "rust-beltization" of the area. The town was the original center of the Westinghouse empire and the home of the Westinghouse Air Brake factory. My school was funded and named for old man Westinghouse.
Re: Interesting article
North of the Border
but does it really work? In theory, the method is sound. I've seen similar drawings but no actual photos that show the operation or the the resulting holes. Has anyone seen holes drilled using the split-bit method? Love to know where we can buy those bits.
Re: Interesting article
Larry Barrett
Check out this video from Roy Underhill. No electrons involved (except for making the video), of course, so not quite appropriate for this forum but you may find it interesting. The square hole is the last half.
Wankel Rotary Engine ?
That's what it reminded me of.