Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Repairing flush birch ply door edge

Posts

Repairing flush birch ply door edge

#1

Repairing flush birch ply door edge

Joe Pack

I messed up cutting a bit of length off a stained flush birch ply door, managing to chip a few pieces of the birch ply...4 spots about 1/2" long x anywhere from 1/8 to 1/2" wide. I really don't want to cut them out and try to patch them in with new veneer, then try to match. I would prefer to use a wood filler stained to match. (I have some of the original stain.) I have used a couple of brands of wood filler before, but only where I was going to sand and paint them; the actual color did not matter. Is there a particular brand or type of wood filler that would allow me to color, then fill? Any tips?

Re: Repairing flush birch ply door edge

#2

Re: Repairing flush birch ply door edge

Barry Irby

I have a furniture repair kit from Mohawk I bought forty years ago. It has shellac burn in sticks in various colors. There is a "knife" similar to a putty knife that is electrically heated. You melt the stick and smooth it into the area. Then you can get real fancy and paint in grain with a brush that has about one hair.

I would be happy loan the stuff to you. It has been sitting around for literally over forty years and I pull out some little part of it and make use of it now and then.

Go to the Mohawk site and check it out. They still exist.

Aren't you near Richmond VA?

Re: Repairing flush birch ply door edge

#3

Re: Repairing flush birch ply door edge

Jerry Gibbs

many repairs today are made using epoxy and sawdust from the wood to be colored, in this case some of the birch veneer. the sanded patch has enough exposed wood/epoxy to take stain.

Re: Repairing flush birch ply door edge

#4

Re: Repairing flush birch ply door edge

FredD

If the Shellac Sticks are that old , they died years ago and you would need new ones.

The new ones last much longer.

FredD

Re: Repairing flush birch ply door edge

#5

Re: Repairing flush birch ply door edge

Barry Irby

Fred, You are probably right. I bought this kit when I was in college to earn some extra income. It has basically sat on a shelf in my various shops ever since. I have not tried a shellac stick in a very long time. Like many things, I may have saved them to death.

The kit has about fifty little bottles of powered dye in many colors. I am beginning to find them useful. Used some the other day to dye some epoxy and glued together a spalted board. Looks great.