Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

PowerTwist vs AccuLink V-belts

Posts

PowerTwist vs AccuLink V-belts

#1

PowerTwist vs AccuLink V-belts

Charlie Lenz

I use to be able to buy the Fenner Drives PowerTwist link belt locally from Motion Industries by the foot. In the last couple of years they don't stock it because they can't remember the last time they sold any is what I was told. Now I see there is a knockoff offered by Harbor Freight and probably Grizzly also at a much more reasonable price. The PowerTwist prices out at about $10 per ft ( approximately 75 cents per link ) The Acculink prices out at about $5 per ft. I'm not a big fan of Harbor Freight or Grizzly, but thats quite a price difference for what it is, and in comparison seems to be very minimal differences between the two in a review that I looked at. Personally I think that Fenner is priceing the PowerTwist out of the market. Could this be another example of the loss of American jobs due to corporate greed ?

Re: PowerTwist vs AccuLink V-belts

#2

Re: PowerTwist vs AccuLink V-belts

Dave's Not Here

I would say that in no way is this a case of corporate greed but more than likely a cost of doing business issue.

Re: PowerTwist vs AccuLink V-belts

#3

Re: PowerTwist vs AccuLink V-belts

Clementine

I just bought a 5' length of 1/2" at Harbor Frieght for $24.99. Can't use it on my General table saw (it's 3/8 drive), but there are several other tools that can use it. Wish I could find 3/8" for the General.

Re: PowerTwist vs AccuLink V-belts

#5

Re: PowerTwist vs AccuLink V-belts

Charlie Lenz

I guess what I'm getting at is that not only does Motion Industries not stock it locally, ACME Electric Tool Crib of the North quit selling it, both places were due to a lack of sales, and Inline Industries quit selling it also, and replaced it with the Accu-Link. And if I remember correctly the most common reason that people don't buy the PowerTwist is the price. I have the PowerTwist on a Contractor's table saw, and on a 14" band saw and I like it. In the near future I'll probably buy more for another saw since I have so much of it. But now when I need some I'll have to tack on another $10 for shipping in most cases. When I sell a machine, I usually take the PowerTwist belt off and resize it for another machine.

Re: PowerTwist vs AccuLink V-belts

#6

Re: PowerTwist vs AccuLink V-belts

Charlie Lenz

Well after some exhaustive searching locally with not much luck, and then on the net, I placed an order with Grizzly today for the 1/2" x 4 ft Fenner Drives PowerTwist link belt. Grizzly ended up being the best deal at about $30 plus shipping. The shipping was about $10, so I also ordered a large paddle switch for the table saw to go along for the ride, and the shipping charge didn't change. So after it's all said and done, I feel like I got a good square deal, and I'm happy. The package should be here by Friday.