Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

My latest machinery find

Posts

My latest machinery find

#1

My latest machinery find

Charlie Lenz

An old Rockwell 9" Contractor's table saw. I will be useing it in my small winter basement shop for small projects. The nice thing about these saws are they are about 25% smaller in physical size then a 10" Contractor's table saw. I bought a belt cover for it last week, and I may put a link belt on it yet and a paddle switch. I'm not sure if I'll spend the money for a better fence yet, maybe someday down the road. For now I just feel fortunate to have found it. http://vintagemachinery.org/photoindex/detail.aspx?id=13139

Re: My latest machinery find

#2

Re: My latest machinery find

Thomas S Stockton

Charlie

It should be a real nice saw to use, my second saw was a borrowed 9" contractors saw and it served me well for a couple of years and I made some nice furniture on it.

A couple of recommendations, if you cut plywood make sure it is either fastened to the floor or the base is stabilized they can be a little tipsy, probably no worse than any other saw of that size but something to keep in mind. If you use a combo blade you might want to go with a thin kerf model and if you like using separate rip and crosscut blade a thin kerf rip blade and a regular crosscut would be fine.

Tom

Re: My latest machinery find

#3

Re: My latest machinery find

Bayward

Nice find, should make a good saw for the shop.

I own a Rockwell Super 900 9" radial arm saw. Mine is a one owner saw given to me in 1960 as a Christmas present. I just replaced the wooden table on the saw for the first time about a month ago. Other than that everything is still original. I even have the blade that came with it, although it just hangs on the wall these days.

Bob

Re: My latest machinery find

#4

Re: Thomas, I'm not worried

Charlie Lenz

Thomas, I was more worried about the saw tipping on the enclosed base that the saw was on. Now that I replaced that base with an open stand that has a larger foot print, I'm not too worried at all about it tipping, especially when I won't be running large sheets of ply or anything like it through the saw, the basement shop isn't large enough to do that. The saw came with a Delta 9" 40 tooth full kerf blade that appears to still be in good shape. I think that the saw will be just right for my situation. I have a Delta 10" Contractor's table saw that I've had in the main shop since 1995, and it's all I've ever needed in that shop. I don't claim to be a fine furniture designer or cabinet maker.

Re: My latest machinery find

#5

Re: My latest machinery find

Charlie Lenz

Last week I got the Fenner Drives PowerTwist Link Belt for the saw, and I spent the better part of yesterday building a mount for the Paddle Switch that I ordered. Now I just need to get an electrical box and wire it up. http://vintagemachinery.org/photoindex/detail.aspx?id=13139


img

Re: My latest machinery find

#6

Re: My latest machinery find

Charles Jackson III

Nice find Charlie!