Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Old hand plane repair / cleaning

Posts

Old hand plane repair / cleaning

#1

Old hand plane repair / cleaning

Ron Conrad

I was given 2 older hand planes. A Stanley Handyman & a Stanley Bailey # 4. Both are covered in rust and very rough looking. I was hoping for some advice in the Yes do this & No this is not the way to do it area. I feel it would be borderline criminal not to clean them up and put back in to service. All advice would be greatly appreciated ! Ron

Re: Old hand plane repair / cleaning

#2

Re: Old hand plane repair / cleaning

Ken Oakley Sunny St. Cloud, Fla.

Try This--http://www.supertool.com/stanleybg/stan1.htm

Re: Old hand plane repair / cleaning

#3

Re: Old hand plane repair / cleaning

Larry Barrett

Check out the WoodCentral articles, for example this one by Bob Smalser:

http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_611.shtml

Also, on the HandTools forum, Scott Grandstaff had a great article a few days ago on restoring a really rusted Davis Inclinometer - same process will work on your plane:

http://www.woodcentral.com/woodworking/forum/handtools.pl/page/2/md/read/id/442830/sbj/davis-mantle-clock-inclinometer/

Re: Old hand plane repair / cleaning

#4

Re: Old hand plane repair / cleaning

steve mackay

Bead blasting at a biker or machine shop $12-$20, pint can of japaning from WAGjapanning $15, your time and effort $ ?. Personaly I wouldn't seek out "Handyman"s but, if I had 'em I'd go for it.

Re: Old hand plane repair / cleaning

#5

Re: Old hand plane repair / cleaning

Ron Conrad

Well it's kinda / sorta like this. The Handyman & a millers falls plane were handed to me by a 94 yr old recent widow. They belonged to her husband or Father or both ? Both are in considerable ready for the scrap heap with rust shape. She is a relative of my wife , we went to the funeral service of the hubby. When she found out that I was a wanna be woodworker , she dug them out of a just burn me please shed. Now every one knows I have them and want to see what I do with them ( Oh the joy of it all ) She was well meaning , and I appreciate the thought. Guess I now have a winter , nothing better to do , project trying to clean them up. Thanks for the information , Ron

Re: Old hand plane repair / cleaning

#6

SURE ! . . .

steve mackay

If you fix 'em up its still cheaper than new ones. Just to find out if you like use'n 'em. And OLD ones are much better than new ones (unless your buying the high-end stuff). Something else too . . . fixing them up, I learned WAY to much about how and why they do what they do. Now I know there are certine tasks they do better than any other tool. Plus, now you've got this WAY cool tool you use that is good look'n and you did it yourself. But be carefull . . . it CAN be addicting !

This one looked like a rusty boat anchor you just pulled up when I got it. And I'm just a rookie around here.


Re: Old hand plane repair / cleaning

#7

Re: Old hand plane repair / cleaning

Barry Irby

This has little or nothing to do with cleaning up a plane and I sympathise with your plight. I recently cleaned up a big bolt used in a house jack or screw jack that I found under a house and it was rusted solid. I soaked it in some brake fluid I should have thrown away for a day or two and it went from Couldn't turn it with a wrench to turn it with your fingers. Not pretty, but functional. I was amazed. The denizens of the hand tool forum may be assembling a hit team for suggesting you soak a plane in brake fluid. I don't know if that is part of the "proper" methods. Hmm? I wonder? If the quiet side does not use power tools do they use fire arms?

Re: Old hand plane repair / cleaning

#8

Slingshots !


Re: Old hand plane repair / cleaning

#9

Re: Old hand plane repair / cleaning

George Colonel's Workshop-Havertown PA

Good Afternoon Ron,

Some years ago I was given a Stanley #6 Foreplane by a guy I had done work for, and who couldn't pay me when the work was done to his satisfaction. I got the short end of the stick, stuck U NO WHERE. The plane featured a broken tote, missing knob, some rust, and the sole was covered with hammer strike marks, some of which were dimpled out. I don't know how it stood the abuse and remained un-cracked and un-distorted. I made a new tote, as the broken one was not gluable. I made a sandwich of ash and mahogany, and used that laminated stock to fashion the tote as well as the knob. My #3 son was attending Williamson Free School of the Mechanical Trades, and learning Carpentry. His roommate was in Machine Shop, and Ken asked him to flatten out the plane sole. The school instructors demonstrated use of a lapping machine. When the sole came back to me it had a mirror finish, and was absolutely positively FLAT. I cleaned up other parts of the tool using light machine oil and steel wool, and put a good edge on the iron. It emerged as a thing of beauty, as well as a very nice effective hand plane. The ash/mahogany wooden parts are unusual and un-standardized in shape. However, they compliment the dark green japanning I applied. Worked well for me over the passed 20 years. No picture, but did happen. 8)

George