Plywood Drawers
GregMuller
I need to make some utility drawers for under a work bench. I was thinking of useing 1/2 or 5/8 inch plywood for this. Any opinions either way.
Knowledge You Can Build On — Est. 1998
Plywood Drawers
GregMuller
I need to make some utility drawers for under a work bench. I was thinking of useing 1/2 or 5/8 inch plywood for this. Any opinions either way.
Re: Plywood Drawers
Bill Tindall
quick, cheap. Sounds like a plan. I have accumulate enough "junk" hardwood that I use it for such applications. But lacking a stash of junk, plywood is a good choice.
Re: Plywood Drawers
Dick Coers
I've even made plywood drawers with biscuits. When I was in business with my own custom woodworking business, I had to make two dressers from my kids. I had to squeeze them in between jobs, so cheap and quick it was. That was around 20 years ago, and they both use them with no repairs to date. I ran the sides past the fronts so the biscuits would be in shear. Added a false front to cover that plywood. I rounded over the tops of the plywood so no splinter troubles.
Ummm?
Bill Tindall
"I had to make two dressers from my kids. I had to squeeze them in between jobs,"
Is it ok to make plywood from kids? George will have a field day with this typo!
Re: Plywood Drawers
Barry Irby
I have made many utility drawers out of Baltic birch 1/2" Plywood. I think it makes excellent drawers. I just use but joints with 1/4" crown staples.
I have a friend in the cabinet business and he has made thousands of drawers over a thirty year period and stapled all of them. He has also made hundreds that were dovetailed. Has never had a call back. Almost all of these were mounted on runners.
Re: Ummm?
Dick Coers
You haven't called the police yet have you Bill?
Guess you kinda called the proofreading police though.
Kinda like
Neal in San Jose
What do they make baby oil out of?
Re: Plywood Drawers
Jason Waters
I've used 1/2 and 3/4 ply (cabinet plywood) to make a bunch of mine in my shop. I've even made 3/4 front and 1/2 side when that's all the scrap I had. I've biscuited two sheet on end to make pieces long enough. And they have all held up well. I generally have blind dovetailed mine, as that's what I keep my jig setup to do. Sometimes the tails tear out some when making, but they still hold up. I nearly always put 1/2" bottoms in tool drawers.
Go for it.